Continue to Basket

5mm x 500mm HQ SDS Masonry Drill Bit

Product Code: PROBIT5-500

  • 5mm x 500mm HQ SDS Masonry Drill Bit
  • YG8C Carbide Alloy Cross Tip
  • 40 Chrome Steel Double Flute
5mm x 500mm HQ SDS Masonry Drill Bit
5mm x 500mm HQ SDS Masonry Drill Bit
5mm x 500mm HQ SDS Masonry Drill Bit
5mm x 500mm HQ SDS Masonry Drill Bit
£4.79 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

A 5mm x 500mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.

If you're looking to buy a 5mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.

A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.

This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.

With a 5mm drill bit size, and full length of 500mm (effective length of 490mm) this SDS drill bit is ideal for a range of masonry uses.

Complete with a Tungsten Carbide Alloy Cross Tip, this 5mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.

Product name SDS Max Hammer Drill Bits
Drill Body Material 40 Chrome Steel
Drill Tip Material YG8C Carbide Alloy
Carbide Alloy Tip Cross Tip
Shank SDS Plus
Flute Double flute
Surface treatment Sand Blasted
Hardness Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees
Tip Welding Automatic and Hand Welding
Application Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on
Package Plastic Tube

Product Description

A 5mm x 500mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.

If you're looking to buy a 5mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.

A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.

This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.

With a 5mm drill bit size, and full length of 500mm (effective length of 490mm) this SDS drill bit is ideal for a range of masonry uses.

Complete with a Tungsten Carbide Alloy Cross Tip, this 5mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.

Product name SDS Max Hammer Drill Bits
Drill Body Material 40 Chrome Steel
Drill Tip Material YG8C Carbide Alloy
Carbide Alloy Tip Cross Tip
Shank SDS Plus
Flute Double flute
Surface treatment Sand Blasted
Hardness Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees
Tip Welding Automatic and Hand Welding
Application Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on
Package Plastic Tube

Technical Specification

Width

500mm

Depth

7mm

Height

7mm

Weight

0.07kg

Fred
19/04/2024

Great service and company to deal with

Robert
15/04/2024

I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true


13/04/2024

Ok until Blake sold me an item they didn't have in stock ...

Philip
05/04/2024

Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..

Philip
05/04/2024

Seem fine

Google Company Reviews

David
David
12/07/2024

Order fulfilled successfully and to my satisfaction.

Pepi “The iced lollie” Reeves
Pepi “The iced lollie” Reeves
11/07/2024

very quick delivery - and great service and product. will use again.

Jennifer Wilson (Jenni)
Jennifer Wilson (Jenni)
10/07/2024

Great price and product. Quick delivery too! Would recommend 100%👍🏻

peter hickey
peter hickey
05/07/2024

Product (UHF TV antenna) well built and sensibly priced. Efficient despatch and delivery

Razvan Pruna
Razvan Pruna
01/07/2024

Good customer service. Efficient. Profesional. Also a good selection of products. Recommend the business especially for the quick dispatch.

£4.79 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

A 5mm x 500mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.

If you're looking to buy a 5mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.

A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.

This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.

With a 5mm drill bit size, and full length of 500mm (effective length of 490mm) this SDS drill bit is ideal for a range of masonry uses.

Complete with a Tungsten Carbide Alloy Cross Tip, this 5mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.

Product name SDS Max Hammer Drill Bits
Drill Body Material 40 Chrome Steel
Drill Tip Material YG8C Carbide Alloy
Carbide Alloy Tip Cross Tip
Shank SDS Plus
Flute Double flute
Surface treatment Sand Blasted
Hardness Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees
Tip Welding Automatic and Hand Welding
Application Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on
Package Plastic Tube