Quick Add
10mm x 1000mm HQ SDS Masonry Drill Bit
Product Code: PROBIT10-1000
- 10mm x 1000mm HQ SDS Masonry Drill Bit
- YG8C Carbide Alloy Cross Tip
- 40 Chrome Steel Double Flute
.png){kind=small}
.png){kind=small}
.png)
.png)
Select Drill Size
.png)
5mm x 500mm
8mm x 160mm
10mm x 160mm
10mm x 450mm
10mm x 600mm
10mm x 1000mm
12mm x 450mm
20mm x 410mm
28mm x 450mm
Payment methods accepted
Product Description
A 10mm x 1000mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.
If you're looking to buy a 10mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.
A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.
This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.
With a 10mm drill bit size, and full length of 1000mm (effective length of 950mm) this SDS drill bit is ideal for a range of masonry uses.
Complete with a Tungsten Carbide Alloy Cross Tip, this 10mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.
| Product name | SDS Max Hammer Drill Bits |
|---|---|
| Drill Body Material | 40 Chrome Steel |
| Drill Tip Material | YG8C Carbide Alloy |
| Carbide Alloy Tip | Cross Tip |
| Shank | SDS Plus |
| Flute | Double flute |
| Surface treatment | Sand Blasted |
| Hardness | Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees |
| Tip Welding | Automatic and Hand Welding |
| Application | Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on |
| Package | Plastic Tube |
Alternative products
Product Description
A 10mm x 1000mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.
If you're looking to buy a 10mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.
A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.
This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.
With a 10mm drill bit size, and full length of 1000mm (effective length of 950mm) this SDS drill bit is ideal for a range of masonry uses.
Complete with a Tungsten Carbide Alloy Cross Tip, this 10mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.
| Product name | SDS Max Hammer Drill Bits |
|---|---|
| Drill Body Material | 40 Chrome Steel |
| Drill Tip Material | YG8C Carbide Alloy |
| Carbide Alloy Tip | Cross Tip |
| Shank | SDS Plus |
| Flute | Double flute |
| Surface treatment | Sand Blasted |
| Hardness | Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees |
| Tip Welding | Automatic and Hand Welding |
| Application | Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on |
| Package | Plastic Tube |
Technical Specification
Width
1000mm
Depth
12mm
Height
12mm
Weight
0.07kg
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
07/09/2024
All Arrials I purchased were installed at BBC Radio Gloucester with great results Will be purchasing more soon Thank you Blake Team DAB @ FM
03/09/2024
I used the online customer support system used by Blake UK for advice regarding my intended installation and got very quick and helpful advice on what would suit me best….this was honest advice as I was thinking of purchasing more expensive items that would be unnecessary and also possibly even detrimental to my intended installation. My order was received very quickly and although there had been a small mistake regarding the length of cable I had ordered this was immediately rectified by Blake UK again using their online messaging system. Personally I cannot fault Blake UK and would be very happy to recommend them to anyone, a very helpful and professional business, thank you.
31/08/2024
As described and arrived quickly. Well packaged
30/08/2024
Rapid and extremely efficient service. Ordered in the afternoon and delivered next morning. Exceptional service and excellent products which work impeccable. Would give this Company 11/10!
20/08/2024
Very helpful
Select Drill Size
5mm x 500mm
8mm x 160mm
10mm x 160mm
10mm x 450mm
10mm x 600mm
10mm x 1000mm
12mm x 450mm
20mm x 410mm
28mm x 450mm
Payment methods accepted
Product Description
A 10mm x 1000mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.
If you're looking to buy a 10mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.
A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.
This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.
With a 10mm drill bit size, and full length of 1000mm (effective length of 950mm) this SDS drill bit is ideal for a range of masonry uses.
Complete with a Tungsten Carbide Alloy Cross Tip, this 10mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.
| Product name | SDS Max Hammer Drill Bits |
|---|---|
| Drill Body Material | 40 Chrome Steel |
| Drill Tip Material | YG8C Carbide Alloy |
| Carbide Alloy Tip | Cross Tip |
| Shank | SDS Plus |
| Flute | Double flute |
| Surface treatment | Sand Blasted |
| Hardness | Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees |
| Tip Welding | Automatic and Hand Welding |
| Application | Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on |
| Package | Plastic Tube |
Alternative products
Great service and company to deal with