10mm x 600mm SDS Drill Bit (ideal for drilling Masonry or Concrete)
Product Code: PROBIT10-600
- 10mm x 600mm HQ SDS Masonry Drill Bit
- YG8C Carbide Alloy Cross Tip
- 40 Chrome Steel Double Flute
.png)
.png)
.png){kind=small}
.png){kind=small}
Select Drill Size
.png)
5mm x 500mm
8mm x 160mm
10mm x 1000mm
10mm x 160mm
10mm x 450mm
10mm x 600mm
12mm x 450mm
20mm x 410mm
28mm x 450mm
Payment methods accepted
Product Description
A 10mm x 600mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.
If you're looking to buy a 10mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.
A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.
This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.
With a 10mm drill bit size, and full length of 600mm (effective length of 550mm) this SDS drill bit is ideal for a range of masonry uses.
Complete with a Tungsten Carbide Alloy Cross Tip, this 10mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.
| Product name | SDS Max Hammer Drill Bits |
|---|---|
| Drill Body Material | 40 Chrome Steel |
| Drill Tip Material | YG8C Carbide Alloy |
| Carbide Alloy Tip | Cross Tip |
| Shank | SDS Plus |
| Flute | Double flute |
| Surface treatment | Sand Blasted |
| Hardness | Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees |
| Tip Welding | Automatic and Hand Welding |
| Application | Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on |
| Package | Plastic Tube |
Product Description
A 10mm x 600mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.
If you're looking to buy a 10mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.
A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.
This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.
With a 10mm drill bit size, and full length of 600mm (effective length of 550mm) this SDS drill bit is ideal for a range of masonry uses.
Complete with a Tungsten Carbide Alloy Cross Tip, this 10mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.
| Product name | SDS Max Hammer Drill Bits |
|---|---|
| Drill Body Material | 40 Chrome Steel |
| Drill Tip Material | YG8C Carbide Alloy |
| Carbide Alloy Tip | Cross Tip |
| Shank | SDS Plus |
| Flute | Double flute |
| Surface treatment | Sand Blasted |
| Hardness | Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees |
| Tip Welding | Automatic and Hand Welding |
| Application | Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on |
| Package | Plastic Tube |
Reviews
Sorry, there are no reviews right nowSelect Drill Size
5mm x 500mm
8mm x 160mm
10mm x 1000mm
10mm x 160mm
10mm x 450mm
10mm x 600mm
12mm x 450mm
20mm x 410mm
28mm x 450mm
Payment methods accepted
Product Description
A 10mm x 600mm SDS Masonry Drill Bit for drilling accurate holes in concrete and masonry with its Tungsten Carbide Alloy Cross tip.
If you're looking to buy a 10mm masonry drill bit, this product is ideal for a professional finish when drilling masonry or concrete, the SDS drill bit includes a special finish that helps minimise stress fractures within the bit.
A great choice if you're looking for quick drilling into hard surfaces, provides a clean finish thanks to the 4 flute helix which removes dust immediately.
This drill bit is also fully compatible with SDS Plus Rotary Hammer Drills and SDS Plus Shank Drills.
With a 10mm drill bit size, and full length of 600mm (effective length of 550mm) this SDS drill bit is ideal for a range of masonry uses.
Complete with a Tungsten Carbide Alloy Cross Tip, this 10mm masonry drill bit allows you to easily break through hard surfaces and drill accurately. The Tungsten Carbide tip means longer-lasting life as it resists wear, ultimately proving more cost-efficient.
| Product name | SDS Max Hammer Drill Bits |
|---|---|
| Drill Body Material | 40 Chrome Steel |
| Drill Tip Material | YG8C Carbide Alloy |
| Carbide Alloy Tip | Cross Tip |
| Shank | SDS Plus |
| Flute | Double flute |
| Surface treatment | Sand Blasted |
| Hardness | Drill body: 45-50(H.R.C) degrees after hot treatment, Carbide Alloy Tip: 88-89.5(H.R.A.) degrees |
| Tip Welding | Automatic and Hand Welding |
| Application | Used by Electric Hammer Drills for drilling concrete, stones, bricks and so on |
| Package | Plastic Tube |