Quick Add
10-Way Dual Mode Amplifier with Return Path
Product Code: PROAMP310X
- Can also be used as return path amp
- For up to 10 TVs
- Requires power
- F-Type connectors
- RED compliant
Product Description
10-Way Dual Mode Amplifier (X-Series) with Return Path; 3 Input VHF/FM-1.5dB, DAB-4dB, UHF-4.5dB;10 Output. Requires PROPSU112X or PROPSA125
Features:
- This versatile 10-way amplifier has separate inputs for the VHF/FM, DAB and UHF bands.
- Ideal for digital and analogue house-wide VHF radio and UHF TV distribution to ten or more outlets, ready for digital switch-over.
- It can be powered locally, where mains is available nearby, or remotely via any of its outputs.
- Dual-Mode technology allows the amplifier to behave either as a traditional multi-way distribution amplifier (mode 1), or as return-path amplifier additionally providing remote control capability for a Sky&trade digital satellite receiver or PVR (mode 2). Dual-mode operation, plain or return path - two amplifiers in one!
- Automatic mode selection (senses voltage from RF OUT-2 of Sky&trade receiver at UHF input).
- Line power available for UHF preamplifier (Mode 1 only).
- Power at all outputs for infrared eyes (Mode 2 only).
- Flexible powering capability - local or remote, using PROPSA125
- In Mode 2 - the complete 10-way system can be powered entirely from via a PROLINK22 (Flexible RF Output Modulator - restores Sky&trade distribution) with a PROPSA125 fitted at the PROLINK22 for one of new design Sky&trade Boxes that have that they have no RF2 connection. See link below for more details.
- With equipotential bonding point.
VHF and FM | DAB | UHF | |
Gain | 1.5dB | 4dB | 4.5dB |
Max. Recommended Input | 70dBV | 70dBV | 78dBV |
Mode 1 | Mode 2 | |
Power Requirements* | 8.5 - 18V, 80 mA | 10.5 - 18V, 120 mA |
External Power Out | UHF preamp: 5V at 30mA max. | IR eyes: 9V at 10mA max. (x10) |
*Excludes current drawn by external loads. Certain features of this product are covered by UK Patent no. 2425443. See full data sheet for detailed description and comprehensive data.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Find out more about using this product with the New Sky&trade boxes.
Introducing the PROception PROLINK22 RF replicator
New Sky&trade set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loop through facilities have been replaced with the new I/O PORT a small round connector (10- pin mini-DIN) which allows an external RF replicator (modulator) unit to provide similar distribution functions.
Related products
Alternative products
Product Description
10-Way Dual Mode Amplifier (X-Series) with Return Path; 3 Input VHF/FM-1.5dB, DAB-4dB, UHF-4.5dB;10 Output. Requires PROPSU112X or PROPSA125
Features:
- This versatile 10-way amplifier has separate inputs for the VHF/FM, DAB and UHF bands.
- Ideal for digital and analogue house-wide VHF radio and UHF TV distribution to ten or more outlets, ready for digital switch-over.
- It can be powered locally, where mains is available nearby, or remotely via any of its outputs.
- Dual-Mode technology allows the amplifier to behave either as a traditional multi-way distribution amplifier (mode 1), or as return-path amplifier additionally providing remote control capability for a Sky&trade digital satellite receiver or PVR (mode 2). Dual-mode operation, plain or return path - two amplifiers in one!
- Automatic mode selection (senses voltage from RF OUT-2 of Sky&trade receiver at UHF input).
- Line power available for UHF preamplifier (Mode 1 only).
- Power at all outputs for infrared eyes (Mode 2 only).
- Flexible powering capability - local or remote, using PROPSA125
- In Mode 2 - the complete 10-way system can be powered entirely from via a PROLINK22 (Flexible RF Output Modulator - restores Sky&trade distribution) with a PROPSA125 fitted at the PROLINK22 for one of new design Sky&trade Boxes that have that they have no RF2 connection. See link below for more details.
- With equipotential bonding point.
VHF and FM | DAB | UHF | |
Gain | 1.5dB | 4dB | 4.5dB |
Max. Recommended Input | 70dBV | 70dBV | 78dBV |
Mode 1 | Mode 2 | |
Power Requirements* | 8.5 - 18V, 80 mA | 10.5 - 18V, 120 mA |
External Power Out | UHF preamp: 5V at 30mA max. | IR eyes: 9V at 10mA max. (x10) |
*Excludes current drawn by external loads. Certain features of this product are covered by UK Patent no. 2425443. See full data sheet for detailed description and comprehensive data.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Find out more about using this product with the New Sky&trade boxes.
Introducing the PROception PROLINK22 RF replicator
New Sky&trade set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loop through facilities have been replaced with the new I/O PORT a small round connector (10- pin mini-DIN) which allows an external RF replicator (modulator) unit to provide similar distribution functions.
Technical Specification
IEC or F Type
F Type
Number of Outputs
10
Number of Inputs
3
Internal or External
Internal
Amplifier Includes Full Output
No
Product Requires Power Supply Unit (PSU)
No
Amplifiers With Return Path
No
RED Class 0 or Class 1
Class 0
Inline Booster or Distribution Amplifier
Distribution Amplifier (Low)
Width
40mm
Depth
110mm
Height
190mm
Weight
0.42kg
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
07/09/2024
All Arrials I purchased were installed at BBC Radio Gloucester with great results Will be purchasing more soon Thank you Blake Team DAB @ FM
03/09/2024
I used the online customer support system used by Blake UK for advice regarding my intended installation and got very quick and helpful advice on what would suit me best….this was honest advice as I was thinking of purchasing more expensive items that would be unnecessary and also possibly even detrimental to my intended installation. My order was received very quickly and although there had been a small mistake regarding the length of cable I had ordered this was immediately rectified by Blake UK again using their online messaging system. Personally I cannot fault Blake UK and would be very happy to recommend them to anyone, a very helpful and professional business, thank you.
31/08/2024
As described and arrived quickly. Well packaged
30/08/2024
Rapid and extremely efficient service. Ordered in the afternoon and delivered next morning. Exceptional service and excellent products which work impeccable. Would give this Company 11/10!
20/08/2024
Very helpful
Product Description
10-Way Dual Mode Amplifier (X-Series) with Return Path; 3 Input VHF/FM-1.5dB, DAB-4dB, UHF-4.5dB;10 Output. Requires PROPSU112X or PROPSA125
Features:
- This versatile 10-way amplifier has separate inputs for the VHF/FM, DAB and UHF bands.
- Ideal for digital and analogue house-wide VHF radio and UHF TV distribution to ten or more outlets, ready for digital switch-over.
- It can be powered locally, where mains is available nearby, or remotely via any of its outputs.
- Dual-Mode technology allows the amplifier to behave either as a traditional multi-way distribution amplifier (mode 1), or as return-path amplifier additionally providing remote control capability for a Sky&trade digital satellite receiver or PVR (mode 2). Dual-mode operation, plain or return path - two amplifiers in one!
- Automatic mode selection (senses voltage from RF OUT-2 of Sky&trade receiver at UHF input).
- Line power available for UHF preamplifier (Mode 1 only).
- Power at all outputs for infrared eyes (Mode 2 only).
- Flexible powering capability - local or remote, using PROPSA125
- In Mode 2 - the complete 10-way system can be powered entirely from via a PROLINK22 (Flexible RF Output Modulator - restores Sky&trade distribution) with a PROPSA125 fitted at the PROLINK22 for one of new design Sky&trade Boxes that have that they have no RF2 connection. See link below for more details.
- With equipotential bonding point.
VHF and FM | DAB | UHF | |
Gain | 1.5dB | 4dB | 4.5dB |
Max. Recommended Input | 70dBV | 70dBV | 78dBV |
Mode 1 | Mode 2 | |
Power Requirements* | 8.5 - 18V, 80 mA | 10.5 - 18V, 120 mA |
External Power Out | UHF preamp: 5V at 30mA max. | IR eyes: 9V at 10mA max. (x10) |
*Excludes current drawn by external loads. Certain features of this product are covered by UK Patent no. 2425443. See full data sheet for detailed description and comprehensive data.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Find out more about using this product with the New Sky&trade boxes.
Introducing the PROception PROLINK22 RF replicator
New Sky&trade set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loop through facilities have been replaced with the new I/O PORT a small round connector (10- pin mini-DIN) which allows an external RF replicator (modulator) unit to provide similar distribution functions.
Related products
Alternative products
Great service and company to deal with