Continue to Basket

Overlap Blocking Filter Pass 48-60

Product Code: PROOBF1C

  • Overlap blocking filter Ch.48-60
  • Used for blocking unwanted signals
  • F-Type
  • 1 input 1 output
Overlap Blocking Filter Pass 48-60
Overlap Blocking Filter Pass 48-60
£10.91 Inc VAT
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

Overlap Blocking Filter Pass 48-60

A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.

The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!

Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.

Other Applications:

The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.

Features:

  • Optimised pass-bands cover most UK requirements in just four versions.
  • Good out-of band rejection helps block TETRA and GSM, also LTE (4G), depending on model.
  • F type connectors for good screening factor, helping prevent leakage around the filter.
  • Good 75O match throughout the pass-band.
  • DC blocked, no damage if inadvertently line-powered (24VDC max).
  • Optional weatherproof outdoor housing available.
  • Equipotential bonding terminal.

Technical Information:

Product Code
Channels
Freq.Lower Upper1

Insertion

loss2

Stopband

Rejection3

Conn.

PROOBF1A

21 - 30

470 - 550MHz

DC - 438MHz

578 - 1600MHz

<3dB

>30dB

F

PROOBF1B

39 - 52

614 - 726MHz

DC - 578MHz

762 - 1600MHz

<3dB

>30dB

F

PROOBF1C

48 - 62

686 - 806MHz

DC - 650MHz

920 - 1600MHz

<3dB

>27dB

F

PROOBF1E

39 - 62

614 - 806MHz

DC - 562MHz

920 - 1600MHz

<3dB

>27dB

F

PROMHDCASE-S

Case for external installations


1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.

OBF

Product Description

Overlap Blocking Filter Pass 48-60

A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.

The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!

Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.

Other Applications:

The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.

Features:

  • Optimised pass-bands cover most UK requirements in just four versions.
  • Good out-of band rejection helps block TETRA and GSM, also LTE (4G), depending on model.
  • F type connectors for good screening factor, helping prevent leakage around the filter.
  • Good 75O match throughout the pass-band.
  • DC blocked, no damage if inadvertently line-powered (24VDC max).
  • Optional weatherproof outdoor housing available.
  • Equipotential bonding terminal.

Technical Information:

Product Code
Channels
Freq.Lower Upper1

Insertion

loss2

Stopband

Rejection3

Conn.

PROOBF1A

21 - 30

470 - 550MHz

DC - 438MHz

578 - 1600MHz

<3dB

>30dB

F

PROOBF1B

39 - 52

614 - 726MHz

DC - 578MHz

762 - 1600MHz

<3dB

>30dB

F

PROOBF1C

48 - 62

686 - 806MHz

DC - 650MHz

920 - 1600MHz

<3dB

>27dB

F

PROOBF1E

39 - 62

614 - 806MHz

DC - 562MHz

920 - 1600MHz

<3dB

>27dB

F

PROMHDCASE-S

Case for external installations


1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.

OBF

Technical Specification

IEC or F Type

F-Type

Width

20mm

Depth

48mm

Height

80mm

Weight

0.04kg

Frequently Asked Questions

An Overlap Blocking Filter (OBF) Pass 48-60 is a specific filtering mechanism used in signal processing, particularly in digital communications, to mitigate interference and enhance signal quality within the frequency range of 48 to 60 Hz.
OBF Pass 48-60 is specifically designed to target interference and noise within the narrow frequency band of 48 to 60 Hz. Unlike broader filters, which may cover wider frequency ranges, OBF Pass 48-60 focuses exclusively on this range to improve signal clarity.

Fred
19/04/2024

Great service and company to deal with

Fred
19/04/2024

Ray
16/04/2024

Robert
15/04/2024

I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true

Robert
15/04/2024

Excellent Aerial really pulls in very weak signals with help with correct masthead amplifier

Google Company Reviews

Steve Clarke
Steve Clarke
07/10/2024

Came across Blake through a google search for a decent DAB/FM aerial. Good reviews, decent website. I purchased one, it arrived quickly and with the decent instructions, I got it installed and it's working great. All good. Would use again, recommended.

Mark Baines
Mark Baines
22/09/2024

Ive moved into a new build property and wanted to fit a TV aerial in my loft. After searching the net looking for advice on aerials I found Blake’s website. I put in my postcode and not only told what aerial I needed it also told me the transmitter I need to aim at. Prices were very reasonable and delivery was very quick. Was kept very well informed on my orders progress. Very impressed. Would definitely recommend to anyone 👍🏻

Neil Provis
Neil Provis
07/09/2024

All Arrials I purchased were installed at BBC Radio Gloucester with great results Will be purchasing more soon Thank you Blake Team DAB @ FM

Jamie Smith
Jamie Smith
03/09/2024

I used the online customer support system used by Blake UK for advice regarding my intended installation and got very quick and helpful advice on what would suit me best….this was honest advice as I was thinking of purchasing more expensive items that would be unnecessary and also possibly even detrimental to my intended installation. My order was received very quickly and although there had been a small mistake regarding the length of cable I had ordered this was immediately rectified by Blake UK again using their online messaging system. Personally I cannot fault Blake UK and would be very happy to recommend them to anyone, a very helpful and professional business, thank you.

Damien Baker
Damien Baker
31/08/2024

As described and arrived quickly. Well packaged

£10.91 Inc VAT
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

Overlap Blocking Filter Pass 48-60

A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.

The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!

Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.

Other Applications:

The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.

Features:

  • Optimised pass-bands cover most UK requirements in just four versions.
  • Good out-of band rejection helps block TETRA and GSM, also LTE (4G), depending on model.
  • F type connectors for good screening factor, helping prevent leakage around the filter.
  • Good 75O match throughout the pass-band.
  • DC blocked, no damage if inadvertently line-powered (24VDC max).
  • Optional weatherproof outdoor housing available.
  • Equipotential bonding terminal.

Technical Information:

Product Code
Channels
Freq.Lower Upper1

Insertion

loss2

Stopband

Rejection3

Conn.

PROOBF1A

21 - 30

470 - 550MHz

DC - 438MHz

578 - 1600MHz

<3dB

>30dB

F

PROOBF1B

39 - 52

614 - 726MHz

DC - 578MHz

762 - 1600MHz

<3dB

>30dB

F

PROOBF1C

48 - 62

686 - 806MHz

DC - 650MHz

920 - 1600MHz

<3dB

>27dB

F

PROOBF1E

39 - 62

614 - 806MHz

DC - 562MHz

920 - 1600MHz

<3dB

>27dB

F

PROMHDCASE-S

Case for external installations


1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.

OBF