Quick Add
Overlap Blocking Filter Pass 39-60
Product Code: PROOBF1E
- Overlap blocking filter Ch.39-60
- Used for blocking unwanted signals
- F-Type
- 1 input 1 output
Payment methods accepted
Product Description
Overlap Blocking Filter Pass 39-60
A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.
The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!
Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.
Other Applications:
The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.
Features:
- Optimised pass-bands cover most UK requirements in just four versions.
- Good out-of band rejection helps block TETRA and GSM, also LTE (4G), depending on model.
- F type connectors for good screening factor, helping prevent leakage around the filter.
- Good 75O match throughout the pass-band.
- DC blocked, no damage if inadvertently line-powered (24VDC max).
- Optional weatherproof outdoor housing available.
- Equipotential bonding terminal.
Technical Information:
| Product Code | Channels | Freq. | Lower | Upper1 | Insertion loss2 | Stopband Rejection3 | Conn. |
PROOBF1A | 21 - 30 | 470 - 550MHz | DC - 438MHz | 578 - 1600MHz | <3dB | >30dB | F |
PROOBF1B | 39 - 52 | 614 - 726MHz | DC - 578MHz | 762 - 1600MHz | <3dB | >30dB | F |
PROOBF1C | 48 - 62 | 686 - 806MHz | DC - 650MHz | 920 - 1600MHz | <3dB | >27dB | F |
PROOBF1E | 39 - 62 | 614 - 806MHz | DC - 562MHz | 920 - 1600MHz | <3dB | >27dB | F |
PROMHDCASE-S | Case for external installations | ||||||
1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.
Related products
Product Description
Overlap Blocking Filter Pass 39-60
A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.
The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!
Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.
Other Applications:
The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.
Features:
- Optimised pass-bands cover most UK requirements in just four versions.
- Good out-of band rejection helps block TETRA and GSM, also LTE (4G), depending on model.
- F type connectors for good screening factor, helping prevent leakage around the filter.
- Good 75O match throughout the pass-band.
- DC blocked, no damage if inadvertently line-powered (24VDC max).
- Optional weatherproof outdoor housing available.
- Equipotential bonding terminal.
Technical Information:
| Product Code | Channels | Freq. | Lower | Upper1 | Insertion loss2 | Stopband Rejection3 | Conn. |
PROOBF1A | 21 - 30 | 470 - 550MHz | DC - 438MHz | 578 - 1600MHz | <3dB | >30dB | F |
PROOBF1B | 39 - 52 | 614 - 726MHz | DC - 578MHz | 762 - 1600MHz | <3dB | >30dB | F |
PROOBF1C | 48 - 62 | 686 - 806MHz | DC - 650MHz | 920 - 1600MHz | <3dB | >27dB | F |
PROOBF1E | 39 - 62 | 614 - 806MHz | DC - 562MHz | 920 - 1600MHz | <3dB | >27dB | F |
PROMHDCASE-S | Case for external installations | ||||||
1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.
Technical Specification
IEC or F Type
F Type
Width
20mm
Depth
48mm
Height
80mm
Weight
0.04kg
Frequently Asked Questions
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
07/09/2024
All Arrials I purchased were installed at BBC Radio Gloucester with great results Will be purchasing more soon Thank you Blake Team DAB @ FM
03/09/2024
I used the online customer support system used by Blake UK for advice regarding my intended installation and got very quick and helpful advice on what would suit me best….this was honest advice as I was thinking of purchasing more expensive items that would be unnecessary and also possibly even detrimental to my intended installation. My order was received very quickly and although there had been a small mistake regarding the length of cable I had ordered this was immediately rectified by Blake UK again using their online messaging system. Personally I cannot fault Blake UK and would be very happy to recommend them to anyone, a very helpful and professional business, thank you.
31/08/2024
As described and arrived quickly. Well packaged
30/08/2024
Rapid and extremely efficient service. Ordered in the afternoon and delivered next morning. Exceptional service and excellent products which work impeccable. Would give this Company 11/10!
20/08/2024
Very helpful
Payment methods accepted
Product Description
Overlap Blocking Filter Pass 39-60
A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.
The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!
Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.
Other Applications:
The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.
Features:
- Optimised pass-bands cover most UK requirements in just four versions.
- Good out-of band rejection helps block TETRA and GSM, also LTE (4G), depending on model.
- F type connectors for good screening factor, helping prevent leakage around the filter.
- Good 75O match throughout the pass-band.
- DC blocked, no damage if inadvertently line-powered (24VDC max).
- Optional weatherproof outdoor housing available.
- Equipotential bonding terminal.
Technical Information:
| Product Code | Channels | Freq. | Lower | Upper1 | Insertion loss2 | Stopband Rejection3 | Conn. |
PROOBF1A | 21 - 30 | 470 - 550MHz | DC - 438MHz | 578 - 1600MHz | <3dB | >30dB | F |
PROOBF1B | 39 - 52 | 614 - 726MHz | DC - 578MHz | 762 - 1600MHz | <3dB | >30dB | F |
PROOBF1C | 48 - 62 | 686 - 806MHz | DC - 650MHz | 920 - 1600MHz | <3dB | >27dB | F |
PROOBF1E | 39 - 62 | 614 - 806MHz | DC - 562MHz | 920 - 1600MHz | <3dB | >27dB | F |
PROMHDCASE-S | Case for external installations | ||||||
1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.
Related products
Great service and company to deal with