Quick Add
CLASS 1 4-Way Variable Gain UHF Masthead Amplifier; 1 Input 4 Outputs Gain 12-27dB
Product Code: BLAMHD14VH
- 90� Wide opening door that clicks open/shut
- Power LED on amplifier
- Foam seal cable entry glands
- Low noise linear power supply
- F-Type connectors
Payment methods accepted
Product Description
RED Class 1, Blake 4-Way High Variable Gain 12-27dB Masthead Amplifier (470-694MHz)
For the best reception with triple filtering:
4G, 5G, and TETRA Compatibility
One of the best designed, CE/UKCA, Class 1 RED compliant, 4G/5G filtered masthead distribution amplifiers on the market.
Designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz). It has variable 12-27dB gain, low noise figures (<2.5dB typical) and uses F-type connectors on both inputs and outputs.
The filter characteristics are >30dB for frequencies <400MHz and Class 1 EN 303 354 compliant for 5G filtered frequencies. The amplifier also filters TETRA signals below 470MHz.
The case opens to a full 90 degrees and the shielded amplifier casing also swings out to 45 degrees, ensuring quick and easy access to the F-type connectors. The amplifier has an LED on the casing to confirm it is receiving power.
The case is further water resistant by a seal on the cable entry points, to preventing both moisture and insects. The case securely closes with a “solid click” but there is also an additional security screw fitted should it be needed.
The amplifier is designed with linearity in mind which allows the ability to handle strong local signals.
To ensure the lowest noise possible, we use a linear power supply rated at 100mA within the kit. Current consumption of this MHA is <50mA.
This also has dual-coloured LED to display short circuit issues running from green (normal) to red (short). The power supply also has infinite short circuit protection to stop damage to the unit.
Designed with the installer in mind:
- 90° Wide Opening door that clicks open/shut.
- Securing Screw(optional).
- Heavy Duty UV Stabilised Cable Tie.
- Dual LED – Advanced Short Circuit Protection.
- Foam Seal Cable Entry Glands.
- Power LED on Amplifier.
- 45° Swivel and Click Amp.
- Robust Wall Mountable Lugs.
- Low Noise Figures <2.2dB.
- F-Type Connectors.
- Equipotential bonding point/earthing tag.
Here’s some early feedback from installers:
“The quality is superb – you can tell that immediately from the robust housing.”
“I’d say it’s a nicely designed product with some neat features like foam seal cable entry – you’ve clearly been listening to installers.”
“Great to finally have a masthead that I can fit compression connectors into. Nice work.”
This is a new expanding range, which will become a family of products.
Alternative products
Product Description
RED Class 1, Blake 4-Way High Variable Gain 12-27dB Masthead Amplifier (470-694MHz)
For the best reception with triple filtering:
4G, 5G, and TETRA Compatibility
One of the best designed, CE/UKCA, Class 1 RED compliant, 4G/5G filtered masthead distribution amplifiers on the market.
Designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz). It has variable 12-27dB gain, low noise figures (<2.5dB typical) and uses F-type connectors on both inputs and outputs.
The filter characteristics are >30dB for frequencies <400MHz and Class 1 EN 303 354 compliant for 5G filtered frequencies. The amplifier also filters TETRA signals below 470MHz.
The case opens to a full 90 degrees and the shielded amplifier casing also swings out to 45 degrees, ensuring quick and easy access to the F-type connectors. The amplifier has an LED on the casing to confirm it is receiving power.
The case is further water resistant by a seal on the cable entry points, to preventing both moisture and insects. The case securely closes with a “solid click” but there is also an additional security screw fitted should it be needed.
The amplifier is designed with linearity in mind which allows the ability to handle strong local signals.
To ensure the lowest noise possible, we use a linear power supply rated at 100mA within the kit. Current consumption of this MHA is <50mA.
This also has dual-coloured LED to display short circuit issues running from green (normal) to red (short). The power supply also has infinite short circuit protection to stop damage to the unit.
Designed with the installer in mind:
- 90° Wide Opening door that clicks open/shut.
- Securing Screw(optional).
- Heavy Duty UV Stabilised Cable Tie.
- Dual LED – Advanced Short Circuit Protection.
- Foam Seal Cable Entry Glands.
- Power LED on Amplifier.
- 45° Swivel and Click Amp.
- Robust Wall Mountable Lugs.
- Low Noise Figures <2.2dB.
- F-Type Connectors.
- Equipotential bonding point/earthing tag.
Here’s some early feedback from installers:
“The quality is superb – you can tell that immediately from the robust housing.”
“I’d say it’s a nicely designed product with some neat features like foam seal cable entry – you’ve clearly been listening to installers.”
“Great to finally have a masthead that I can fit compression connectors into. Nice work.”
This is a new expanding range, which will become a family of products.
Technical Specification
Number of Outputs
4
Number of Inputs
1
IEC or F Type
F Type
Internal or External
External
Low, Medium or High
Variable
Amplifier Includes Power Supply Unit (PSU)
No
Amplifier Includes Full Output
No
RED Class 0 or Class 1
Class 1
In Line or Plug In
In Line
Lifetime Guarantee
5years
Weight
0.27kg
Frequently Asked Questions
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
07/09/2024
All Arrials I purchased were installed at BBC Radio Gloucester with great results Will be purchasing more soon Thank you Blake Team DAB @ FM
03/09/2024
I used the online customer support system used by Blake UK for advice regarding my intended installation and got very quick and helpful advice on what would suit me best….this was honest advice as I was thinking of purchasing more expensive items that would be unnecessary and also possibly even detrimental to my intended installation. My order was received very quickly and although there had been a small mistake regarding the length of cable I had ordered this was immediately rectified by Blake UK again using their online messaging system. Personally I cannot fault Blake UK and would be very happy to recommend them to anyone, a very helpful and professional business, thank you.
31/08/2024
As described and arrived quickly. Well packaged
30/08/2024
Rapid and extremely efficient service. Ordered in the afternoon and delivered next morning. Exceptional service and excellent products which work impeccable. Would give this Company 11/10!
20/08/2024
Very helpful
Payment methods accepted
Product Description
RED Class 1, Blake 4-Way High Variable Gain 12-27dB Masthead Amplifier (470-694MHz)
For the best reception with triple filtering:
4G, 5G, and TETRA Compatibility
One of the best designed, CE/UKCA, Class 1 RED compliant, 4G/5G filtered masthead distribution amplifiers on the market.
Designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz). It has variable 12-27dB gain, low noise figures (<2.5dB typical) and uses F-type connectors on both inputs and outputs.
The filter characteristics are >30dB for frequencies <400MHz and Class 1 EN 303 354 compliant for 5G filtered frequencies. The amplifier also filters TETRA signals below 470MHz.
The case opens to a full 90 degrees and the shielded amplifier casing also swings out to 45 degrees, ensuring quick and easy access to the F-type connectors. The amplifier has an LED on the casing to confirm it is receiving power.
The case is further water resistant by a seal on the cable entry points, to preventing both moisture and insects. The case securely closes with a “solid click” but there is also an additional security screw fitted should it be needed.
The amplifier is designed with linearity in mind which allows the ability to handle strong local signals.
To ensure the lowest noise possible, we use a linear power supply rated at 100mA within the kit. Current consumption of this MHA is <50mA.
This also has dual-coloured LED to display short circuit issues running from green (normal) to red (short). The power supply also has infinite short circuit protection to stop damage to the unit.
Designed with the installer in mind:
- 90° Wide Opening door that clicks open/shut.
- Securing Screw(optional).
- Heavy Duty UV Stabilised Cable Tie.
- Dual LED – Advanced Short Circuit Protection.
- Foam Seal Cable Entry Glands.
- Power LED on Amplifier.
- 45° Swivel and Click Amp.
- Robust Wall Mountable Lugs.
- Low Noise Figures <2.2dB.
- F-Type Connectors.
- Equipotential bonding point/earthing tag.
Here’s some early feedback from installers:
“The quality is superb – you can tell that immediately from the robust housing.”
“I’d say it’s a nicely designed product with some neat features like foam seal cable entry – you’ve clearly been listening to installers.”
“Great to finally have a masthead that I can fit compression connectors into. Nice work.”
This is a new expanding range, which will become a family of products.
Alternative products
Great service and company to deal with