Continue to Basket

Overlap Blocking Filter Pass 39-52

Product Code: PROOBF1B

  • Overlap blocking filter Ch.39-52
  • Used for blocking unwanted signals
  • F-Type
  • 1 input 1 output
Overlap Blocking Filter Pass 39-52
Overlap Blocking Filter Pass 39-52

Discontinued

This product has been discontinued, please see products below.

Product Description

Overlap Blocking Filter Pass 39-52

A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.

The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!

Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.

Other Applications:

The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.

Features:

  • Optimised pass-bands cover most UK requirements in just four versions.
  • Good out-of band rejection helps block TETRA and GSM, also LTE (4G), depending on model.
  • F type connectors for good screening factor, helping prevent leakage around the filter.
  • Good 75O match throughout the pass-band.
  • DC blocked, no damage if inadvertently line-powered (24VDC max).
  • Optional weatherproof outdoor housing available.
  • Equipotential bonding terminal.

Technical Information:

Product Code
Channels
Freq.Lower Upper1

Insertion

loss2

Stopband

Rejection3

Conn.

PROOBF1A

21 - 30

470 - 550MHz

DC - 438MHz

578 - 1600MHz

<3dB

>30dB

F

PROOBF1B

39 - 52

614 - 726MHz

DC - 578MHz

762 - 1600MHz

<3dB

>30dB

F

PROOBF1C

48 - 62

686 - 806MHz

DC - 650MHz

920 - 1600MHz

<3dB

>27dB

F

PROOBF1E

39 - 62

614 - 806MHz

DC - 562MHz

920 - 1600MHz

<3dB

>27dB

F

PROMHDCASE-S

Case for external installations


1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.

OBF

Technical Specification

IEC or F Type

F-Type

Width

20mm

Depth

48mm

Height

80mm

Weight

0.04kg

Frequently Asked Questions

An Overlap Blocking Filter (OBF) Pass 39-52 is a specific filtering technique used in signal processing, particularly in digital communications, to attenuate interference and improve signal quality within the frequency range of 39 to 52 Hz.
OBF Pass 39-52 is tailored to address interference and noise within the narrow frequency band of 39 to 52 Hz. Unlike broader filters, which may cover wider frequency ranges, OBF Pass 39-52 focuses specifically on this range to enhance signal clarity.

Thomas
12/06/2025

Very good Web site easy to search for what I needed Can highly recommend and have done so inasmuch as my freind Is going to make a purchase.

Ray
08/06/2025

Service was good. VAT & postage high but we’re in the eu here. Havnt tried it yet.


31/05/2025

Ordered pole, bracket and end stopper online to collect from Rutland Road Sheffield. No problem ordering and all items were in stock. Was informed when order was ready and was served by friendly staff on collection.

Roy
26/05/2025

Fast and easy service with good quality goods

Andy
25/05/2025

Good intial service, products arrived safely. Downside, found the products about 50% cheaper at another retailer who are reliable and trusted, so not lower quality and the aerial which was recommended for my area is not suitable and the quality of reception is worse then the original aerial.

Google Company Reviews

--
--
01/07/2025

Needed a new masthead amp to improve signal distribution to multiple TVs. Supplier had just what I needed and delivered quickly.

Warren Taylor
Warren Taylor
30/06/2025

I needed a custom size aerial tube bent. Blake were quick off the mark to give a quote (very reasonable) and after paying, I had the finished item a few days later by courier. Excellent service, and the finished tube was accurately bent to the drawing.

Richard Fearn
Richard Fearn
29/06/2025

Excellent, good communication and fast shipping. Clear instructions to assemble. A++++

Ian Atkin
Ian Atkin
28/06/2025

Great service, fast delivery, good value, will use again

Terry Evans
Terry Evans
18/06/2025

I had trouble finding the items that I needed but eventually found Blake UK Ltd and they had them, plus at a very good price. Very impressed with their service . 10 out of 10

Discontinued

This product has been discontinued, please see products below.