Quick Add
2-Way External Masthead Splitter/Combiner, Triple Filtered
Product Code: BLAMHS12P
- Can be used to combine signals
- Boosted signal through the output
- F-Type
- 1 input 2 outputs
- Suitable for outdoor use
Payment methods accepted
Product Description
2-Way External Masthead Splitter/Combiner Screened with Power Pass; 1 Input; 2 Output
Screened wideband units intended for splitting digital aerial feeds in strong signal conditions where the use of distribution amplifiers or active splitters is unnecessary. These products can also be used as general-purpose signal splitters or combiners.
Triple filtered: 5G, 4G, & TETRA
Features:
- 2-way and 4-way models available.
- Low insertion loss with excellent 75Ω impedance matching and high isolation between outputs.
- Fully screened RF modules in robust diecast enclosures. Strong cast-in 'F' connectors.
- Proven free-draining moulded enclosures give easy access and cannot trap water.
- Directional power pass (20V and 250mA max.) from any output leg to the common input, allowing an upstream amplifier to be powered.
- With equipotential bonding point/earthing tag.
- Suitable for indoor or outdoor use.
Technical Information:
| Product | Ways | Frequency Range (MHz) | Insertion Loss VHF1 (dB) | Insertion Loss UHF2 (dB) | Output Isolation (dB) | Power Pass3 |
PROMHS12P Mk 2 | 2 | 47-862 | <3.5 | <4.2 | >22 | Yes |
1 47-230MHz. 2 230-862MHz. 3 Directional (diode-steered) power pass from any output(s) to common input. Typical voltage drop 0.8V. Power is isolated from reaching any un-powered output legs. For use in DC negative earth systems only.
Related products
Alternative products
Product Description
2-Way External Masthead Splitter/Combiner Screened with Power Pass; 1 Input; 2 Output
Screened wideband units intended for splitting digital aerial feeds in strong signal conditions where the use of distribution amplifiers or active splitters is unnecessary. These products can also be used as general-purpose signal splitters or combiners.
Triple filtered: 5G, 4G, & TETRA
Features:
- 2-way and 4-way models available.
- Low insertion loss with excellent 75Ω impedance matching and high isolation between outputs.
- Fully screened RF modules in robust diecast enclosures. Strong cast-in 'F' connectors.
- Proven free-draining moulded enclosures give easy access and cannot trap water.
- Directional power pass (20V and 250mA max.) from any output leg to the common input, allowing an upstream amplifier to be powered.
- With equipotential bonding point/earthing tag.
- Suitable for indoor or outdoor use.
Technical Information:
| Product | Ways | Frequency Range (MHz) | Insertion Loss VHF1 (dB) | Insertion Loss UHF2 (dB) | Output Isolation (dB) | Power Pass3 |
PROMHS12P Mk 2 | 2 | 47-862 | <3.5 | <4.2 | >22 | Yes |
1 47-230MHz. 2 230-862MHz. 3 Directional (diode-steered) power pass from any output(s) to common input. Typical voltage drop 0.8V. Power is isolated from reaching any un-powered output legs. For use in DC negative earth systems only.
Technical Specification
IEC or F Type
F Type
Number of Outputs
2
Number of Inputs
1
Internal or External
External
Width
50mm
Depth
112mm
Height
109mm
Weight
0.18Kg
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
21/04/2024
13/04/2024
Thanks for your quick response ?? And fair pricing for that Camera Arrived next day in time for me to install it... Kind regards Roy
01/04/2024
Excellent service, speedy delivery
30/03/2024
Very happy with my new tv aerials and solved a lot of interference issues out many thanks
23/03/2024
Good, well made coaxial TV antenna and F-Type satellite socket wall plate. It works well. The packaging could have done with some bubble wrap around the socket though for protection.
Payment methods accepted
Product Description
2-Way External Masthead Splitter/Combiner Screened with Power Pass; 1 Input; 2 Output
Screened wideband units intended for splitting digital aerial feeds in strong signal conditions where the use of distribution amplifiers or active splitters is unnecessary. These products can also be used as general-purpose signal splitters or combiners.
Triple filtered: 5G, 4G, & TETRA
Features:
- 2-way and 4-way models available.
- Low insertion loss with excellent 75Ω impedance matching and high isolation between outputs.
- Fully screened RF modules in robust diecast enclosures. Strong cast-in 'F' connectors.
- Proven free-draining moulded enclosures give easy access and cannot trap water.
- Directional power pass (20V and 250mA max.) from any output leg to the common input, allowing an upstream amplifier to be powered.
- With equipotential bonding point/earthing tag.
- Suitable for indoor or outdoor use.
Technical Information:
| Product | Ways | Frequency Range (MHz) | Insertion Loss VHF1 (dB) | Insertion Loss UHF2 (dB) | Output Isolation (dB) | Power Pass3 |
PROMHS12P Mk 2 | 2 | 47-862 | <3.5 | <4.2 | >22 | Yes |
1 47-230MHz. 2 230-862MHz. 3 Directional (diode-steered) power pass from any output(s) to common input. Typical voltage drop 0.8V. Power is isolated from reaching any un-powered output legs. For use in DC negative earth systems only.
Related products
Alternative products
Great service and company to deal with