Continue to Basket

Overlap Blocking Filter Pass 21-30

Product Code: PROOBF1A

  • Overlap blocking filter Ch.21-30
  • Used for blocking unwanted signals
  • F type
  • 1 input 1 output
Overlap Blocking Filter Pass 21-30
Overlap Blocking Filter Pass 21-30
£10.31 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

Overlap Blocking Filter Pass 21-30

A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.

The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!

Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.

Other Applications:

The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.

Features:

  • Optimised pass-bands cover most UK requirements in just four versions.
  • Good out-of band rejection helps block TETRA and GSM, also LTE Guide And FAQ">LTE (4G), depending on model.
  • F type connectors for good screening factor, helping prevent leakage around the filter.
  • Good 75O match throughout the pass-band.
  • DC blocked, no damage if inadvertently line-powered (24VDC max).
  • Optional weatherproof outdoor housing available.
  • Equipotential bonding terminal.

Technical Information:

Product Code
Channels
Freq.Lower Upper1

Insertion

loss2

Stopband

Rejection3

Conn.

PROOBF1A

21 - 30

470 - 550MHz

DC - 438MHz

578 - 1600MHz

<3dB

>30dB

F

PROOBF1B

39 - 52

614 - 726MHz

DC - 578MHz

762 - 1600MHz

<3dB

>30dB

F

PROOBF1C

48 - 62

686 - 806MHz

DC - 650MHz

920 - 1600MHz

<3dB

>27dB

F

PROOBF1E

39 - 62

614 - 806MHz

DC - 562MHz

920 - 1600MHz

<3dB

>27dB

F

PROMHDCASE-S

Case for external installations


1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.

OBF

Product Description

Overlap Blocking Filter Pass 21-30

A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.

The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!

Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.

Other Applications:

The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.

Features:

  • Optimised pass-bands cover most UK requirements in just four versions.
  • Good out-of band rejection helps block TETRA and GSM, also LTE Guide And FAQ">LTE (4G), depending on model.
  • F type connectors for good screening factor, helping prevent leakage around the filter.
  • Good 75O match throughout the pass-band.
  • DC blocked, no damage if inadvertently line-powered (24VDC max).
  • Optional weatherproof outdoor housing available.
  • Equipotential bonding terminal.

Technical Information:

Product Code
Channels
Freq.Lower Upper1

Insertion

loss2

Stopband

Rejection3

Conn.

PROOBF1A

21 - 30

470 - 550MHz

DC - 438MHz

578 - 1600MHz

<3dB

>30dB

F

PROOBF1B

39 - 52

614 - 726MHz

DC - 578MHz

762 - 1600MHz

<3dB

>30dB

F

PROOBF1C

48 - 62

686 - 806MHz

DC - 650MHz

920 - 1600MHz

<3dB

>27dB

F

PROOBF1E

39 - 62

614 - 806MHz

DC - 562MHz

920 - 1600MHz

<3dB

>27dB

F

PROMHDCASE-S

Case for external installations


1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.

OBF

Technical Specification

IEC or F Type

F Type

Width

20mm

Depth

48mm

Height

80mm

Weight

0.04Kg

Frequently Asked Questions

OBF Pass 21-30 employs advanced filtering techniques to selectively attenuate or block unwanted signals and noise within the specified frequency range. By reducing interference, the filter helps improve the clarity and reliability of the desired signal.
OBF Pass 21-30 is designed to address interference and noise within a specific frequency range, typically between 21 and 30 Hz. Unlike traditional filters that may target broader frequency bands, OBF Pass 21-30 is tailored to address interference within this narrower range.

Robert
15/04/2024

I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true


13/04/2024

Ok until Blake sold me an item they didn't have in stock ...

Philip
05/04/2024

Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..

Philip
05/04/2024

Seem fine

Philip
05/04/2024

First pole arrived with dents in, no packaging just labels. Second arrived still with a small dent, better packing required..

Google Company Reviews

D
D
21/04/2024

Roy Btcom
Roy Btcom
13/04/2024

Thanks for your quick response 👍🏾 And fair pricing for that Camera Arrived next day in time for me to install it... Kind regards Roy

Paul Taylor
Paul Taylor
01/04/2024

Excellent service, speedy delivery

Robert Hellier
Robert Hellier
30/03/2024

Very happy with my new tv aerials and solved a lot of interference issues out many thanks

Mark Mason
Mark Mason
23/03/2024

Good, well made coaxial TV antenna and F-Type satellite socket wall plate. It works well. The packaging could have done with some bubble wrap around the socket though for protection.

£10.31 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

Overlap Blocking Filter Pass 21-30

A range of UHF band-pass filters from Proception, intended for blocking unwanted reception of transmissions from an adjacent region.

The introduction of high-power digital transmissions has led to problems with some receivers selecting multiplexes from out-of-area transmitters, leaving confused viewers watching the wrong regional services, or even listening to the wrong language!

Although this problem should be solved in the longer term by receiver developments, the use of band-pass filters can provide a quick, simple and cost effective solution, saving installers frequent call-backs.

Other Applications:

The entire range offers excellent cut-off below 470MHz and will help with problems from TETRA, telemetry and 70cm amateur band transmissions. Above channel 62 all versions will help solve GSM mobile phone interference problems, while the A and B models will additionally help suppress the forthcoming LTE (4G) signals.

Features:

  • Optimised pass-bands cover most UK requirements in just four versions.
  • Good out-of band rejection helps block TETRA and GSM, also LTE Guide And FAQ">LTE (4G), depending on model.
  • F type connectors for good screening factor, helping prevent leakage around the filter.
  • Good 75O match throughout the pass-band.
  • DC blocked, no damage if inadvertently line-powered (24VDC max).
  • Optional weatherproof outdoor housing available.
  • Equipotential bonding terminal.

Technical Information:

Product Code
Channels
Freq.Lower Upper1

Insertion

loss2

Stopband

Rejection3

Conn.

PROOBF1A

21 - 30

470 - 550MHz

DC - 438MHz

578 - 1600MHz

<3dB

>30dB

F

PROOBF1B

39 - 52

614 - 726MHz

DC - 578MHz

762 - 1600MHz

<3dB

>30dB

F

PROOBF1C

48 - 62

686 - 806MHz

DC - 650MHz

920 - 1600MHz

<3dB

>27dB

F

PROOBF1E

39 - 62

614 - 806MHz

DC - 562MHz

920 - 1600MHz

<3dB

>27dB

F

PROMHDCASE-S

Case for external installations


1. Specified stop-band rejection is typically maintained to above 2GHz (but is not guaranteed above 1.6GHz).
2. Insertion loss may increase slightly at the pass-band edges, but will not exceed 4dB.
3. Typical stop-band rejection is around 35 to 40dB except close to the band edges.

OBF