Continue to Basket

2-Way TV/FM/DAB Setback/Distribution Amplifier

Product Code: BLAAMP12

  • 1 input UHF and VHF, 2 outputs
  • Linear 8dB gain Ch 21-48
  • Low noise figures (2.2dB typical)
  • F-Type connectors
2-Way TV/FM/DAB Setback/Distribution Amplifier
2-Way TV/FM/DAB Setback/Distribution Amplifier
£28.49 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

RED Class 1, Blake 2-Way Distribution Amplifier 8dB (470-694MHz)

For the best reception with triple filtering:

5G, 4G & TETRA.


One of the best designed, CE/UKCA, Class 1 RED compliant, 4G/5G filtered set back distribution amplifiers on the market.

Designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz). It has 8dB gain. 

The filter characteristics are >30dB for frequencies <400MHz and Class 1 EN 303 354 compliant for 5G filtered frequencies. The amplifier also filters TETRA signals below 470MHz.

This amplifier has low noise figures (Typical 1.17dB, middle of band) and uses F type connectors on both inputs and outputs.

The amplifier is designed with linearity in mind which allows the ability to handle strong local signals. 

To ensure the lowest noise possible, we use a linear power supply which improves reliability.


Designed with the installer in mind:

  • 1 input UHF and VHF, 2 outputs
  • Linear 8dB gain Ch 21-48
  • Low noise figures (2.2dB typical)
  • 12V line out on TV input for masthead amplifier
  • Linear power supply (not switch mode)
  • F type connectors and equipotential bonding point/earthing tag


Here’s some early feedback from installers:

“The quality is superb – you can tell that immediately from the robust housing.”

“I’d say it’s a nicely designed product. I like how the outputs are all in line at the bottom of the amp, making it easy to access.”

“A lot of thought has been put into this product with the features it has, such as the linearity cancelling out the need for variable gain as it can handle strong local signals.”


This is a new expanding range, which will become a family of products.


Product Description

RED Class 1, Blake 2-Way Distribution Amplifier 8dB (470-694MHz)

For the best reception with triple filtering:

5G, 4G & TETRA.


One of the best designed, CE/UKCA, Class 1 RED compliant, 4G/5G filtered set back distribution amplifiers on the market.

Designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz). It has 8dB gain. 

The filter characteristics are >30dB for frequencies <400MHz and Class 1 EN 303 354 compliant for 5G filtered frequencies. The amplifier also filters TETRA signals below 470MHz.

This amplifier has low noise figures (Typical 1.17dB, middle of band) and uses F type connectors on both inputs and outputs.

The amplifier is designed with linearity in mind which allows the ability to handle strong local signals. 

To ensure the lowest noise possible, we use a linear power supply which improves reliability.


Designed with the installer in mind:

  • 1 input UHF and VHF, 2 outputs
  • Linear 8dB gain Ch 21-48
  • Low noise figures (2.2dB typical)
  • 12V line out on TV input for masthead amplifier
  • Linear power supply (not switch mode)
  • F type connectors and equipotential bonding point/earthing tag


Here’s some early feedback from installers:

“The quality is superb – you can tell that immediately from the robust housing.”

“I’d say it’s a nicely designed product. I like how the outputs are all in line at the bottom of the amp, making it easy to access.”

“A lot of thought has been put into this product with the features it has, such as the linearity cancelling out the need for variable gain as it can handle strong local signals.”


This is a new expanding range, which will become a family of products.


Technical Specification

IEC or F Type

F Type

Number of Outputs

2

Number of Inputs

1

Internal or External

Internal

Amplifier Includes Full Output

No

Product Requires Power Supply Unit (PSU)

No

RED Class 0 or Class 1

Class 1

Inline Booster or Distribution Amplifier

Distribution Amplifier (Low)

Lifetime Guarantee

15years

Weight

1.01Kg

Frequently Asked Questions

The amplifier provides an 8dB gain, which is designed to boost signal strength for better reception quality.
Yes, the amplifier complies with CE/UKCA Class 1 RED standards, ensuring it meets the necessary regulatory requirements for safety, health, and environmental protection.
Yes, the amplifier features triple filtration for 5G, 4G, and TETRA interference, ensuring a clearer signal by minimising potential disruptions caused by these frequencies.

Robert
15/04/2024

I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true


13/04/2024

Ok until Blake sold me an item they didn't have in stock ...

Philip
05/04/2024

Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..

Philip
05/04/2024

Seem fine

Philip
05/04/2024

First pole arrived with dents in, no packaging just labels. Second arrived still with a small dent, better packing required..

Google Company Reviews

D
D
21/04/2024

Roy Btcom
Roy Btcom
13/04/2024

Thanks for your quick response 👍🏾 And fair pricing for that Camera Arrived next day in time for me to install it... Kind regards Roy

Paul Taylor
Paul Taylor
01/04/2024

Excellent service, speedy delivery

Robert Hellier
Robert Hellier
30/03/2024

Very happy with my new tv aerials and solved a lot of interference issues out many thanks

Mark Mason
Mark Mason
23/03/2024

Good, well made coaxial TV antenna and F-Type satellite socket wall plate. It works well. The packaging could have done with some bubble wrap around the socket though for protection.

£28.49 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

RED Class 1, Blake 2-Way Distribution Amplifier 8dB (470-694MHz)

For the best reception with triple filtering:

5G, 4G & TETRA.


One of the best designed, CE/UKCA, Class 1 RED compliant, 4G/5G filtered set back distribution amplifiers on the market.

Designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz). It has 8dB gain. 

The filter characteristics are >30dB for frequencies <400MHz and Class 1 EN 303 354 compliant for 5G filtered frequencies. The amplifier also filters TETRA signals below 470MHz.

This amplifier has low noise figures (Typical 1.17dB, middle of band) and uses F type connectors on both inputs and outputs.

The amplifier is designed with linearity in mind which allows the ability to handle strong local signals. 

To ensure the lowest noise possible, we use a linear power supply which improves reliability.


Designed with the installer in mind:

  • 1 input UHF and VHF, 2 outputs
  • Linear 8dB gain Ch 21-48
  • Low noise figures (2.2dB typical)
  • 12V line out on TV input for masthead amplifier
  • Linear power supply (not switch mode)
  • F type connectors and equipotential bonding point/earthing tag


Here’s some early feedback from installers:

“The quality is superb – you can tell that immediately from the robust housing.”

“I’d say it’s a nicely designed product. I like how the outputs are all in line at the bottom of the amp, making it easy to access.”

“A lot of thought has been put into this product with the features it has, such as the linearity cancelling out the need for variable gain as it can handle strong local signals.”


This is a new expanding range, which will become a family of products.