6ft x 1.5in, 16g cranked aluminium 90 Degree Bend

6ft x 1.5in 16g 90° Cranked Aluminium Alloy Mast

This 6ft 90° cranked aluminium alloy mast is designed for mounting compatible Starlink™ equipment, TV aerials and satellite equipment where additional clearance is required around rooflines, eaves or other obstructions. The 90° cranked profile offsets the upper section of the mast away from the mounting point, helping provide clearance where a straight mast would not be suitable.

Manufactured from aluminium alloy tube, the mast has a 38.1 mm diameter and 1.5 mm wall thickness. Its 1.5in diameter also provides compatibility with suitable 1.5in mast couplers and mounting accessories.

For further guidance on selecting a suitable mast, please refer to our Correct Choice of Masts page. For help selecting the appropriate mounting bracket, please refer to our Bracket Selection Guide.

Features

• 90° cranked design for offset mounting
  
• Suitable for compatible Starlink™ installations
  
• Suitable for aerial and satellite installations
  
• 38.1 mm diameter aluminium alloy mast
  
• 1.5 mm wall thickness

Applications

Suitable for domestic and professional Starlink™, aerial or satellite installations where clearance is required between the mounting point and an eave, roof edge or similar obstruction. The 90° cranked section provides a substantial offset between the fixing position and upper mast section.

Please note: The stated pole length is the overall length of the pole before cranking. Once cranked, the finished pole will have a shorter vertical height than the stated length.

Starlink™ Compatible Mounting Range

We have designed a range of mounting products compatible with Starlink™ equipment. This includes 1.5in mast couplers, straight and cranked aluminium poles, and selected poles supplied with mounting brackets.

Starlink™ is ideally suited to areas where connectivity has previously been unreliable or unavailable. The service is used around the world to provide access to online services, communications, education and other internet-based applications.

Using satellites in low Earth orbit, Starlink™ supports activities including streaming, video calls, online gaming and other high-data applications. Users can expect download speeds between 100Mb/s and 200Mb/s, with latency as low as 20ms in many locations.

Starlink™ Compatible Products:

• SAT2A - 6ft x 1.5in 16g 90° cranked pole with 18in stand-off wall channel bracket
• SAT2A-EXT - 9ft x 1.5in 16g 90° cranked pole with 18in stand-off wall channel bracket
• A54 - 6ft x 1.5in 16g cranked alloy pole
• A55 - 6ft x 1.5in 16g straight alloy pole
• A55-2S - 6ft x 1.5in 16g 90° cranked alloy pole
• AC10B - 1.5in mast coupler

Technical Information

Standoff figures are approximate.