4-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 4 Output-9dB
Product Code: PROAMP24
- For distributing TV, FM & DAB signal
- For up to 4 TVs
- Self powered
- IEC coax connectors
- RED compliant
Payment methods accepted
Product Description
4-Way FM/DAB/UHF {FORGEGLOSSARY_Distribution Amplifier}; 2 Input; 4 Output-9dB
Features:- Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
- Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
- Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
- 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
- Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
- With equipotential bonding point.
Technical Information:
| Product Code | Inputs | Outputs | Connections | Gain | Full Gain | Max Input | Line Power |
PROAMP24 Mk3 | 2* | 4 | IEC | 9dB | - | 77dBV | 12V, 100mA |
PROAMP26 Mk3 | 2* | 6 | IEC | 5dB | 15.9dB | 77dBV | 12V, 100mA |
PROAMP28 Mk3 | 2* | 8 | IEC | 5dB | 15.8dB | 77dBV | 12V, 100mA |
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
- Cool-running designs independently certified to relevant safety and EMC standards.
- Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
PROAMP Range:
PROAMP11-1-Way VHF/UHF Setback Amplifier; 1 Input;1 Output-12dB
PROAMP12-2-Way VHF/UHF Setback Amplifier; 1 Input;2 Output-4dB
PROAMP24-4-Way FM/DAB/UHF {FORGEGLOSSARY_Distribution Amplifier};2 Input; 4 Output-9dB
PROAMP26-6-Way FM/DAB/UHF {FORGEGLOSSARY_Distribution Amplifier};2 Input; 6 Output-5dB + 1 Full Output-18dB
PROAMP28-8-Way FM/DAB/UHF {FORGEGLOSSARY_Distribution Amplifier};2 Input; 8 Output-5dB + 1 Full Output-18dB
Technical Specification
IEC or F Type
IEC
Number of Outputs
4
Number of Inputs
2
Internal or External
Internal
Amplifier Includes Full Output
No
Product Requires Power Supply Unit (PSU)
No
RED Class 0 or Class 1
Class 0
Inline Booster or Distribution Amplifier
Distribution Amplifier (Low)
Payment methods accepted