Continue to Basket

1-Way F-Type Inline Power Supply; 1 Input; 1 Output-12v 100mA

Product Code: PROPSU11F

  • Single-way F-Type inline power supply
  • 1 input and 1 output configuration
  • Output: 12V, 100mA
  • Provides reliable power
  • Compact and easy to use
1-Way F-Type Inline Power Supply; 1 Input; 1 Output-12v 100mA
1-Way F-Type Inline Power Supply; 1 Input; 1 Output-12v 100mA
1-Way F-Type Inline Power Supply; 1 Input; 1 Output-12v 100mA

Discontinued

Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...

Product Description

    12V 100mA Power Supply, Screened with F-Type Connectors

    Features:

    • High-quality 12V F-type in-line power unit for use with PROception masthead amplifiers and similar applications.
    • Fully-screened RF modules, compliant with EMC standards (BS EN 55013 and BS EN 50083-2).
    • Low RF insertion loss and excellent 75ohm impedance matching.
    • Passes return path signals, allowing use in IR eye systems (PROPSU11F MK2 only).
    • Electronic long-term short-circuit protection with two-colour LED indication.

      Technical Information:

      Product Code

      No of RF Outputs

      Frequency Range

      Insertion Loss

      Connector Type

      DC Output

      Max Current

      Short cct. Warning

      PROPSU11F

      1

      *5-862MHz

      0.6dB

      F

      12V

      100mA

      Yes

      • Utilises an efficient cooling-running mains transformer, fitted with an approved thermal fuse for overheat protection.
      • The two-colour power indicator LED gives immediate warning of an output short-circuit condition.
      • Regulation is maintained over the full 207-253 V AC supply voltage range, for any output current up to the maximum of 100mA.
        Designs independently certified to relevant safety standard BS EN 60065.
      • Supplied with an approved fitted 12A plug to BS 1363.

        *Mk2 version (47 - 862MHz for previous Mk1 version no longer available).

        Please refer to the power supply compatibility matrix to confirm the correct selection of a power supply with chosen amplifier.

      Product Description

        12V 100mA Power Supply, Screened with F-Type Connectors

        Features:

        • High-quality 12V F-type in-line power unit for use with PROception masthead amplifiers and similar applications.
        • Fully-screened RF modules, compliant with EMC standards (BS EN 55013 and BS EN 50083-2).
        • Low RF insertion loss and excellent 75ohm impedance matching.
        • Passes return path signals, allowing use in IR eye systems (PROPSU11F MK2 only).
        • Electronic long-term short-circuit protection with two-colour LED indication.

          Technical Information:

          Product Code

          No of RF Outputs

          Frequency Range

          Insertion Loss

          Connector Type

          DC Output

          Max Current

          Short cct. Warning

          PROPSU11F

          1

          *5-862MHz

          0.6dB

          F

          12V

          100mA

          Yes

          • Utilises an efficient cooling-running mains transformer, fitted with an approved thermal fuse for overheat protection.
          • The two-colour power indicator LED gives immediate warning of an output short-circuit condition.
          • Regulation is maintained over the full 207-253 V AC supply voltage range, for any output current up to the maximum of 100mA.
            Designs independently certified to relevant safety standard BS EN 60065.
          • Supplied with an approved fitted 12A plug to BS 1363.

            *Mk2 version (47 - 862MHz for previous Mk1 version no longer available).

            Please refer to the power supply compatibility matrix to confirm the correct selection of a power supply with chosen amplifier.

          Technical Specification

          IEC or F Type

          F Type

          Number of Outputs

          1

          Number of Inputs

          1

          In Line or Plug In

          In Line

          Width

          55mm

          Depth

          90mm

          Height

          165mm

          Weight

          0.39Kg

          Fred
          19/04/2024

          Great service and company to deal with

          Robert
          15/04/2024

          I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true


          13/04/2024

          Ok until Blake sold me an item they didn't have in stock ...

          Philip
          05/04/2024

          Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..

          Philip
          05/04/2024

          Seem fine

          Google Company Reviews

          Michael M1KEY Hardy
          Michael M1KEY Hardy
          06/06/2024

          Went to Blakes for some u bolts for a radio antenna on my tower, the young girl at the desk and the bold chap wandering round the place helped us.We had tried screw fix B & Q looked on line and we were met with a great service, chap even wanted to drill the antenna plate out with bigger holes, will be back here for all my antenna parts in future. Mike Hardy M1KEY from barnsley

          Andy Bowman
          Andy Bowman
          03/06/2024

          Simple to order, clear product description and delivered as scheduled. Worked first time out of the box. Would recommend without hesitation.

          Peter H
          Peter H
          02/06/2024

          Faultless and quick

          Keith-keki Young
          Keith-keki Young
          19/05/2024

          Blake UK Ltd I was pleasantly surprised by this Sheffield Company. They're easy to order from,in my case online and email and text communication as I lip read, the item was ready to collect as per the order agreed. Far better service than Amazon for the said item still on back order with Amozon with a delivery date as far away as November 2024. I think it's probably come full circle, and shopping experience might be coming back, and with a company like Blake UK...I'd happily recommend them over and over. Well done ?

          Dennis “DIY DEN” Horseman
          Dennis “DIY DEN” Horseman
          14/05/2024

          A REFRESHING CHANGE. Needed more info on an item. Fast response, friendly, informed, clear, offered alternative suggestion.... First experience with "Blake". Couldn't have asked for more. Thanks a lot Blake. I'm buying.

          Discontinued

          Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...

          Product Description

            12V 100mA Power Supply, Screened with F-Type Connectors

            Features:

            • High-quality 12V F-type in-line power unit for use with PROception masthead amplifiers and similar applications.
            • Fully-screened RF modules, compliant with EMC standards (BS EN 55013 and BS EN 50083-2).
            • Low RF insertion loss and excellent 75ohm impedance matching.
            • Passes return path signals, allowing use in IR eye systems (PROPSU11F MK2 only).
            • Electronic long-term short-circuit protection with two-colour LED indication.

              Technical Information:

              Product Code

              No of RF Outputs

              Frequency Range

              Insertion Loss

              Connector Type

              DC Output

              Max Current

              Short cct. Warning

              PROPSU11F

              1

              *5-862MHz

              0.6dB

              F

              12V

              100mA

              Yes

              • Utilises an efficient cooling-running mains transformer, fitted with an approved thermal fuse for overheat protection.
              • The two-colour power indicator LED gives immediate warning of an output short-circuit condition.
              • Regulation is maintained over the full 207-253 V AC supply voltage range, for any output current up to the maximum of 100mA.
                Designs independently certified to relevant safety standard BS EN 60065.
              • Supplied with an approved fitted 12A plug to BS 1363.

                *Mk2 version (47 - 862MHz for previous Mk1 version no longer available).

                Please refer to the power supply compatibility matrix to confirm the correct selection of a power supply with chosen amplifier.