Teltonika 5G router with eSIM & Dual-SIM

The RUTX50 supports 5x Gigabit Ethernet ports and its mobile bandwidth of 3.3 Gbps is the fastest of any single-modem Teltonika router. Dual SIM cards are supported for failover/auto-switch purposes, adding to the router's versatility, and a real-time signal strength indicator is included to assist with external antenna positioning. It supports 4x4 MIMO antenna connections to allow for the strongest possible mobile signal.

The RUTX50 has 4x LTE antenna connectors and 2x WiFi antenna connectors, which means you can use either indoor or outdoor antennas, ensuring you get the reliable connection you need whether that is at home, at the office or on the road. Additionally, it has an antenna connection for GNNS/GPS.

The router broadcasts 11ac WiFi with speeds of up to 867 Mbps, granting it strong wireless coverage. This WiFi can be secured with WPA3, the latest standard in wireless security, and a Wireless Mesh / Roaming feature is included for use with other Teltonika routers, allowing one continuous WiFi SSID to be shared across a large area.

The RUTX50 has Dual-SIM card slots as well as built-in eSIM. this allows you to easily install new eSIM profiles onto the router as-and-when you need them via the IP address web interface. Bear in mind that while the eSIM is in use, the second physical SIM slot will be inactive.

The RUTX50 supports various other advanced features including a captive portal with a customisable landing page, multiple VPN services, firewalls, and Remote Management support (Teltonika RMS). All of these functionalities and more can be configured using the clear and intuitive RutOS web interface. Auto-APN configuration is enabled by default in order to make the RUTX50 as quick and easy as possible to set up, even for people with minimal networking experience.

To further the RUTX50's versatility, this router also supports passive PoE (9-30v) through its LAN1 port, allowing it to be positioned remotely from any regular power sockets using a passive PoE injector. Please note that most PoE switches operate on 802.3af/at standards and therefore will not be suitable for powering this unit.