Quick Add
4-Way FM/DAB/UHF Amplifier: Return Path
Product Code: PROAMP24R
- For distributing TV, FM & DAB signal
- For up to 4 TVs
- Self powered
- F type connectors with return path
- RED compliant
Discontinued
Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...
Product Description
4-Way FM/DAB/UHF test Distribution Amplifier with Return Path; 2 Input; 4 Output-9dB
Features:- These mains-powered multi-way amplifiers are used to distribute the UHF output from a satellite receiver (usually from the RF OUT-2 port of a Sky&trade box), making a selected satellite channel available at up to eight additional outputs around the home.
- The built-in RF return path (5-10 MHz) together with power for remote infrared receiver 'eyes' on all outputs makes it a simple matter to add remote control. VHF/FM and/or DAB aerials can also be connected (4-, 6- and 8-way models only).
- Cool-running designs independently certified to relevant safety and EMC standards.
- Separate filtered VHF and UHF inputs on the 4-, 6- and 8-way models. NEW Mk 3 versions have dual-filtered VHF inputs covering both Bands II and III, adding capability for DAB, with equipotential bonding point.
- Sharp cut-off 'TETRA' filtering on UHF input of 4-, 6- and 8-way models helps avoid interference from nearby HF and VHF transmitters.
- 9V power for infrared receiver eyes on all outputs (max. load 15 mA per outlet). Each output is individually short-circuit protected.
- Compatible with PROception Amplifiers">PROSAT1EYE low-current IR eye, and industry-standard eyes.
- With equipotential bonding point.
| Product Code | Inputs | Outputs | Connectors | Gain | Max Input | Frequency Range |
PROAMP24R Mk3 | 2* | 4 | F | 9dB | 77dBV |
|
PROAMP28R Mk3 | 2* | 8 | F | 5dB | 77dBV | VHF (BII and BIII) UHF |
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Find out more about using this product with the New Sky&trade boxes.
Introducing the PROception PROLINK22 RF replicator
New Sky&trade set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loop through facilities have been replaced with the new I/O PORT a small round connector (10- pin mini-DIN) which allows an external RF replicator (modulator) unit to provide similar distribution functions.
Related products
Alternative products
Product Description
4-Way FM/DAB/UHF test Distribution Amplifier with Return Path; 2 Input; 4 Output-9dB
Features:- These mains-powered multi-way amplifiers are used to distribute the UHF output from a satellite receiver (usually from the RF OUT-2 port of a Sky&trade box), making a selected satellite channel available at up to eight additional outputs around the home.
- The built-in RF return path (5-10 MHz) together with power for remote infrared receiver 'eyes' on all outputs makes it a simple matter to add remote control. VHF/FM and/or DAB aerials can also be connected (4-, 6- and 8-way models only).
- Cool-running designs independently certified to relevant safety and EMC standards.
- Separate filtered VHF and UHF inputs on the 4-, 6- and 8-way models. NEW Mk 3 versions have dual-filtered VHF inputs covering both Bands II and III, adding capability for DAB, with equipotential bonding point.
- Sharp cut-off 'TETRA' filtering on UHF input of 4-, 6- and 8-way models helps avoid interference from nearby HF and VHF transmitters.
- 9V power for infrared receiver eyes on all outputs (max. load 15 mA per outlet). Each output is individually short-circuit protected.
- Compatible with PROception Amplifiers
- With equipotential bonding point.
| Product Code | Inputs | Outputs | Connectors | Gain | Max Input | Frequency Range |
PROAMP24R Mk3 | 2* | 4 | F | 9dB | 77dBV |
|
PROAMP28R Mk3 | 2* | 8 | F | 5dB | 77dBV | VHF (BII and BIII) UHF |
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Find out more about using this product with the New Sky&trade boxes.
Introducing the PROception PROLINK22 RF replicator
New Sky&trade set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loop through facilities have been replaced with the new I/O PORT a small round connector (10- pin mini-DIN) which allows an external RF replicator (modulator) unit to provide similar distribution functions.
Technical Specification
IEC or F Type
F Type
Number of Outputs
4
Number of Inputs
2
Internal or External
Internal
Amplifier Includes Full Output
No
Product Requires Power Supply Unit (PSU)
No
Amplifiers With Return Path
No
RED Class 0 or Class 1
Class 0
Inline Booster or Distribution Amplifier
Distribution Amplifier (Low)
Width
50mm
Depth
105mm
Height
335mm
Weight
0.9Kg
15/04/2024
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
05/04/2024
First pole arrived with dents in, no packaging just labels. Second arrived still with a small dent, better packing required..
Google Company Reviews
13/04/2024
Thanks for your quick response 👍🏾 And fair pricing for that Camera Arrived next day in time for me to install it... Kind regards Roy
01/04/2024
Excellent service, speedy delivery
30/03/2024
Very happy with my new tv aerials and solved a lot of interference issues out many thanks
23/03/2024
Good, well made coaxial TV antenna and F-Type satellite socket wall plate. It works well. The packaging could have done with some bubble wrap around the socket though for protection.
22/03/2024
Super quick service. Please use less tape on the mast next time :-)
Discontinued
Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...
Product Description
4-Way FM/DAB/UHF test Distribution Amplifier with Return Path; 2 Input; 4 Output-9dB
Features:- These mains-powered multi-way amplifiers are used to distribute the UHF output from a satellite receiver (usually from the RF OUT-2 port of a Sky&trade box), making a selected satellite channel available at up to eight additional outputs around the home.
- The built-in RF return path (5-10 MHz) together with power for remote infrared receiver 'eyes' on all outputs makes it a simple matter to add remote control. VHF/FM and/or DAB aerials can also be connected (4-, 6- and 8-way models only).
- Cool-running designs independently certified to relevant safety and EMC standards.
- Separate filtered VHF and UHF inputs on the 4-, 6- and 8-way models. NEW Mk 3 versions have dual-filtered VHF inputs covering both Bands II and III, adding capability for DAB, with equipotential bonding point.
- Sharp cut-off 'TETRA' filtering on UHF input of 4-, 6- and 8-way models helps avoid interference from nearby HF and VHF transmitters.
- 9V power for infrared receiver eyes on all outputs (max. load 15 mA per outlet). Each output is individually short-circuit protected.
- Compatible with PROception Amplifiers">PROSAT1EYE low-current IR eye, and industry-standard eyes.
- With equipotential bonding point.
| Product Code | Inputs | Outputs | Connectors | Gain | Max Input | Frequency Range |
PROAMP24R Mk3 | 2* | 4 | F | 9dB | 77dBV |
|
PROAMP28R Mk3 | 2* | 8 | F | 5dB | 77dBV | VHF (BII and BIII) UHF |
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
Find out more about using this product with the New Sky&trade boxes.
Introducing the PROception PROLINK22 RF replicator
New Sky&trade set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loop through facilities have been replaced with the new I/O PORT a small round connector (10- pin mini-DIN) which allows an external RF replicator (modulator) unit to provide similar distribution functions.
Related products
Alternative products
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true