Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
With equipotential bonding point.
Technical Information:
Product Code
Inputs
Outputs
Connections
Gain
Full Gain
Max Input
Line Power
PROAMP24 Mk3
2*
4
IEC
9dB
-
77dBV
12V, 100mA
PROAMP26 Mk3
2*
6
IEC
5dB
15.9dB
77dBV
12V, 100mA
PROAMP28 Mk3
2*
8
IEC
5dB
15.8dB
77dBV
12V, 100mA
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
Cool-running designs independently certified to relevant safety and EMC standards.
Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
