Continue to Basket

4-Way FM/DAB/UHF Amplifier

Product Code: PROAMP24

  • For distributing TV, FM & DAB signal
  • For up to 4 TVs
  • Self powered
  • IEC coax connectors
  • RED compliant
4-Way FM/DAB/UHF Amplifier
4-Way FM/DAB/UHF Amplifier

Discontinued

Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...

Product Description

4-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 4 Output-9dB

Features:

  • Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
  • Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
  • Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
  • 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
  • Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
  • With equipotential bonding point.

Technical Information:

Product Code
Inputs
OutputsConnectionsGainFull Gain
Max Input
Line Power

PROAMP24 Mk3

2*

4

IEC

9dB

2*

6

IEC

5dB

15.9dB

77dBV

12V, 100mA

PROAMP28 Mk3

2*

8

IEC

5dB

15.8dB

77dBV

12V, 100mA


*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.

  • Cool-running designs independently certified to relevant safety and EMC standards.
  • Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.

    The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.

    PROAMP Range:

    PROAMP11-1-Way VHF/UHF Setback Amplifier; 1 Input;1 Output-12dB

    PROAMP12-2-Way VHF/UHF Setback Amplifier; 1 Input;2 Output-4dB

    PROAMP24-4-Way FM/DAB/UHF Distribution Amplifier;2 Input; 4 Output-9dB

    PROAMP28-8-Way FM/DAB/UHF Distribution Amplifier;2 Input; 8 Output-5dB + 1 Full Output-18dB

    Product Description

    4-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 4 Output-9dB

    Features:

    • Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
    • Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
    • Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
    • 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
    • Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
    • With equipotential bonding point.

    Technical Information:

    Product Code
    Inputs
    OutputsConnectionsGainFull Gain
    Max Input
    Line Power

    PROAMP24 Mk3

    2*

    4

    IEC

    9dB

    2*

    6

    IEC

    5dB

    15.9dB

    77dBV

    12V, 100mA

    PROAMP28 Mk3

    2*

    8

    IEC

    5dB

    15.8dB

    77dBV

    12V, 100mA


    *VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.

    • Cool-running designs independently certified to relevant safety and EMC standards.
    • Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.

      The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.

      PROAMP Range:

      PROAMP11-1-Way VHF/UHF Setback Amplifier; 1 Input;1 Output-12dB

      PROAMP12-2-Way VHF/UHF Setback Amplifier; 1 Input;2 Output-4dB

      PROAMP24-4-Way FM/DAB/UHF Distribution Amplifier;2 Input; 4 Output-9dB

      PROAMP28-8-Way FM/DAB/UHF Distribution Amplifier;2 Input; 8 Output-5dB + 1 Full Output-18dB

      Technical Specification

      IEC or F Type

      IEC

      Number of Outputs

      4

      Number of Inputs

      2

      Internal or External

      Internal

      Amplifier Includes Full Output

      No

      Product Requires Power Supply Unit (PSU)

      No

      RED Class 0 or Class 1

      Class 0

      Inline Booster or Distribution Amplifier

      Distribution Amplifier (Low)

      Width

      50mm

      Depth

      105mm

      Height

      335mm

      Weight

      0.9Kg

      Feefo Company Reviews

      Ken
      22/02/2024

      The product was dispatched quickly and I would highly recommend using them again


      19/02/2024

      Fast delivery, good price, better quality than existing bracket.

      George
      07/02/2024

      Does the job - excellent.

      George
      07/02/2024

      Response from Blake UK in every respect was very good and the product purchased is excellent. My only criticism is that the package that my omni FM/Dab aerial was sent in could have had more packing material as the carton was damaged in transit with a part of the product sticking out.

      Keith
      05/02/2024

      Excellent service, both before and after sales.

      Google Company Reviews

      Mark Mason
      23/03/2024

      Good, well made coaxial TV antenna and F-Type satellite socket wall plate. It works well. The packaging could have done with some bubble wrap around the socket though for protection.

      Jon Eyes
      22/03/2024

      Super quick service. Please use less tape on the mast next time :-)

      Roy Millington
      22/03/2024

      As usual, efficient service, great value products and easy to deal with.

      Dermot Nolan
      19/03/2024

      I already knew Blake from years ago. They are a quality vendor. The first BLA-LP56K was damaged by the courier in transit and they replaced it straightaway no quibbles the next day. This worked a treat in the loft with a masthead amp (have power in big loft). C/N : 30dB, sig: 100%, quality:100%: BER: 0.0. The aerial was connected into an IRS as the rooftop aerial had failed probably due to water ingress in the balun and I was quoted from £250 - £450 for a replacement outside antenna, probably because we have a very tall house/outside installation.Why bother when you know a log in the loft is going to work 11 miles from a 200kW station. As Blake say this is suitable for medium or strong signal areas but the addition of the masthead boosts the signal nicely for all round the house distribution.

      Nev Wilson
      14/03/2024

      Best online chat service, gets exact answers and has good advice. Hoping products just as good!

      Discontinued

      Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...

      Product Description

      4-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 4 Output-9dB

      Features:

      • Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
      • Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
      • Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
      • 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
      • Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
      • With equipotential bonding point.

      Technical Information:

      Product Code
      Inputs
      OutputsConnectionsGainFull Gain
      Max Input
      Line Power

      PROAMP24 Mk3

      2*

      4

      IEC

      9dB

      2*

      6

      IEC

      5dB

      15.9dB

      77dBV

      12V, 100mA

      PROAMP28 Mk3

      2*

      8

      IEC

      5dB

      15.8dB

      77dBV

      12V, 100mA


      *VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.

      • Cool-running designs independently certified to relevant safety and EMC standards.
      • Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.

        The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.

        PROAMP Range:

        PROAMP11-1-Way VHF/UHF Setback Amplifier; 1 Input;1 Output-12dB

        PROAMP12-2-Way VHF/UHF Setback Amplifier; 1 Input;2 Output-4dB

        PROAMP24-4-Way FM/DAB/UHF Distribution Amplifier;2 Input; 4 Output-9dB

        PROAMP28-8-Way FM/DAB/UHF Distribution Amplifier;2 Input; 8 Output-5dB + 1 Full Output-18dB