CLASS 1 4-Way Variable Gain UHF Masthead Amplifier; 1 Input 4 Outputs Gain 12-27dB
Product Code: BLAMHD14VH
- 90 Degree Wide opening door
- Power LED on amplifier
- Foam seal cable entry glands
- Low noise linear power supply
- F-Type connectors
Product Description
RED Class 1, Blake 4-Way High Variable Gain 12-27dB Masthead Amplifier (470-694MHz)
For the best reception with triple filtering:
4G, 5G, and TETRA Compatibility
One of the best designed, CE/UKCA, Class 1 RED compliant, 4G/5G filtered masthead distribution amplifiers on the market.
Designed to remove or reduce 5G/4G LTE interference and amplify TV frequencies within the 21-48 band (470-694MHz). It has variable 12-27dB gain, low noise figures (<2.5dB typical) and uses F-type connectors on both inputs and outputs.
The filter characteristics are >30dB for frequencies <400MHz and Class 1 EN 303 354 compliant for 5G filtered frequencies. The amplifier also filters TETRA signals below 470MHz.
The case opens to a full 90 degrees and the shielded amplifier casing also swings out to 45 degrees, ensuring quick and easy access to the F-type connectors. The amplifier has an LED on the casing to confirm it is receiving power.
The case is further water resistant by a seal on the cable entry points, to preventing both moisture and insects. The case securely closes with a “solid click” but there is also an additional security screw fitted should it be needed.
The amplifier is designed with linearity in mind which allows the ability to handle strong local signals.
To ensure the lowest noise possible, we use a linear power supply rated at 100mA within the kit. Current consumption of this MHA is <50mA.
This also has dual-coloured LED to display short circuit issues running from green (normal) to red (short). The power supply also has infinite short circuit protection to stop damage to the unit.
Designed with the installer in mind:
- 90° Wide Opening door that clicks open/shut.
- Securing Screw(optional).
- Heavy Duty UV Stabilised Cable Tie.
- Dual LED – Advanced Short Circuit Protection.
- Foam Seal Cable Entry Glands.
- Power LED on Amplifier.
- 45° Swivel and Click Amp.
- Robust Wall Mountable Lugs.
- Low Noise Figures <2.2dB.
- F-Type Connectors.
- Equipotential bonding point/earthing tag.
Here’s some early feedback from installers:
“The quality is superb – you can tell that immediately from the robust housing.”
“I’d say it’s a nicely designed product with some neat features like foam seal cable entry – you’ve clearly been listening to installers.”
“Great to finally have a masthead that I can fit compression connectors into. Nice work.”
This is a new expanding range, which will become a family of products.
Technical Specification
Number of Outputs
4
Number of Inputs
1
IEC or F Type
F-Type
Internal or External
External
Low, Medium or High
Variable
Amplifier Includes Power Supply Unit (PSU)
No
Amplifier Includes Full Output
No
RED Class 0 or Class 1
Class 1
In Line or Plug In
In-Line
Lifetime Guarantee
5-years
Width
50mm
Depth
146mm
Height
109mm
Weight
0.27kg
Product Comparison
Number of Outputs
4
1
2
4
2
4
4
Low, Medium or High
Variable
High (27dB)
Variable
Variable
Variable
Variable
Variable
Amplifier Includes Power Supply Unit (PSU)
No
No
No
No
Yes
Yes
Yes
Frequently Asked Questions
29/11/2024
29/11/2024
Excellent service, even with a small order.
25/11/2024
Helpful and prompt service. Know their stuff.
25/11/2024
Great company to deal with
25/11/2024
Speedy delivery, friendly tech support and good prices. Thank you.
Google Company Reviews
29/11/2024
No issues. Very quick posting. Thank you
26/11/2024
Item was as described and arrived promptly. Would recommend and use again.
22/11/2024
Very helpful on the phone and swift (less than 24 hours) delivery. Many thanks.
21/11/2024
Great service, ordered Monday evening and received Wednesday morning. Can't fault that.
21/11/2024
item works well
No issues Thanks