Remote Control Receiver - extra receiver unit for PROREMKIT
Product Code: PROREMEXT
- Extra receiver for remote control kit
- Don’t have to run wires
- Up to 10 units with 1 transmitter
£21.34
inc vat
In stock
The Sales Department will confirm your lead-time on your acknowledgement email Lifetime warranty on internally installed products
Includes support
Payment methods accepted
Product Description
Remote Control Extender Receiver for use with PROREMKIT Remote Control Extender System
Additional receiver for the remote control extender system (PROREMKIT) to remote control your household A/V appliances such as VCR, DVD player, LD player, Set-top-box, Satellite Receiver from the existing coax cable.
Features:- Operating range: 5M(typ.) at 30 angle.
- Comes with 3 IR Blasters.
- Independently powered (no concern over power loss at distance).
- Compatible with digital modulators.
- Variable gain control to increase or decrease signal, depending on distance.
- Uses existing pre-installed coax cabling perhaps from an old Sky™ RF2 system.
- Can be used with DC pass splitters, such as Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">PROSPL204.
- Install up to 10 or more RX units with 1 transmitter.
- Powered via 5v 75mA supply, such as USB from TV or Sky™ system.
- Discreet blaster eyes.
- Great way to send IR commands to a DVR in the loft.
- For use with remote extender kit PROREMKIT.
Technical Information:
| Transmitter | Receiver | |
| Carrier Frequency (KHz) | From remote source | 30-60 |
| Operating Range | 30cm min. | 5m at 30 angle |
| Insertion Loss (MHz/dB) | 470-862 / 3 max. | 470-862 / 3 max. |
| Power Supply | External 5VDC (USB-A to DC plug cable) | External 5VDC (USB-A to DC plug cable) |
| Dimensions (mm) | 67 x 49.4 x 26.5 | 67 x 49.4 x 26.5 |
Product Description
Remote Control Extender Receiver for use with PROREMKIT Remote Control Extender System
Additional receiver for the remote control extender system (PROREMKIT) to remote control your household A/V appliances such as VCR, DVD player, LD player, Set-top-box, Satellite Receiver from the existing coax cable.
Features:- Operating range: 5M(typ.) at 30 angle.
- Comes with 3 IR Blasters.
- Independently powered (no concern over power loss at distance).
- Compatible with digital modulators.
- Variable gain control to increase or decrease signal, depending on distance.
- Uses existing pre-installed coax cabling perhaps from an old Sky™ RF2 system.
- Can be used with DC pass splitters, such as Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">PROSPL204.
- Install up to 10 or more RX units with 1 transmitter.
- Powered via 5v 75mA supply, such as USB from TV or Sky™ system.
- Discreet blaster eyes.
- Great way to send IR commands to a DVR in the loft.
- For use with remote extender kit PROREMKIT.
Technical Information:
| Transmitter | Receiver | |
| Carrier Frequency (KHz) | From remote source | 30-60 |
| Operating Range | 30cm min. | 5m at 30 angle |
| Insertion Loss (MHz/dB) | 470-862 / 3 max. | 470-862 / 3 max. |
| Power Supply | External 5VDC (USB-A to DC plug cable) | External 5VDC (USB-A to DC plug cable) |
| Dimensions (mm) | 67 x 49.4 x 26.5 | 67 x 49.4 x 26.5 |
Reviews
Sorry, there are no reviews right now
£21.34
inc vat
In stock
The Sales Department will confirm your lead-time on your acknowledgement email Lifetime warranty on internally installed products
Includes support
Payment methods accepted
Product Description
Remote Control Extender Receiver for use with PROREMKIT Remote Control Extender System
Additional receiver for the remote control extender system (PROREMKIT) to remote control your household A/V appliances such as VCR, DVD player, LD player, Set-top-box, Satellite Receiver from the existing coax cable.
Features:- Operating range: 5M(typ.) at 30 angle.
- Comes with 3 IR Blasters.
- Independently powered (no concern over power loss at distance).
- Compatible with digital modulators.
- Variable gain control to increase or decrease signal, depending on distance.
- Uses existing pre-installed coax cabling perhaps from an old Sky™ RF2 system.
- Can be used with DC pass splitters, such as Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">Splitter; Loss 4.2dB Bi-Dir DC Pass To Both Legs">PROSPL204.
- Install up to 10 or more RX units with 1 transmitter.
- Powered via 5v 75mA supply, such as USB from TV or Sky™ system.
- Discreet blaster eyes.
- Great way to send IR commands to a DVR in the loft.
- For use with remote extender kit PROREMKIT.
Technical Information:
| Transmitter | Receiver | |
| Carrier Frequency (KHz) | From remote source | 30-60 |
| Operating Range | 30cm min. | 5m at 30 angle |
| Insertion Loss (MHz/dB) | 470-862 / 3 max. | 470-862 / 3 max. |
| Power Supply | External 5VDC (USB-A to DC plug cable) | External 5VDC (USB-A to DC plug cable) |
| Dimensions (mm) | 67 x 49.4 x 26.5 | 67 x 49.4 x 26.5 |