Continue to Basket

8-Way FM/DAB/UHF Distribution Amplifier

Product Code: PROAMP28

  • For distributing TV, FM & DAB signal
  • For up to 8 TVs
  • Self powered
  • IEC coax connectors
  • RED compliant
8-Way FM/DAB/UHF Distribution Amplifier
8-Way FM/DAB/UHF Distribution Amplifier

Discontinued

This product has been discontinued, please see products below.

Product Description

8-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 8 Output-5dB + 1 Full Output-16dB

Features:

  • Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
  • Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
  • Sharp cut-off TETRA filtering on UHF input helps avoid interference from nearby transmitters.
  • 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
  • Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
  • With equipotential bonding point.

Technical Information:

Product Code
Inputs
OutputsConnectionsGainFull Gain
Max Input
Line Power

PROAMP24 Mk3

2*

4

IEC

9dB

-

77dBV

12V, 100mA

PROAMP26 Mk3

2*

6

IEC

5dB

15.9dB

77dBV

12V, 100mA

PROAMP28 Mk3

2*

8

IEC

5dB

15.8dB

77dBV

12V, 100mA


*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.

  • Cool-running designs independently certified to relevant safety and EMC standards.
  • Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.

    The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.

    PROAMP Range:

    PROAMP11-1-Way VHF/UHF Setback Amplifier; 1 Input;1 Output-12dB

    PROAMP12-2-Way VHF/UHF Setback Amplifier; 1 Input;2 Output-4dB

    PROAMP24-4-Way FM/DAB/UHF Distribution Amplifier;2 Input; 4 Output-9dB

    PROAMP28-8-Way FM/DAB/UHF Distribution Amplifier;2 Input; 8 Output-5dB + 1 Full Output-18dB

    Technical Specification

    IEC or F Type

    IEC

    Number of Outputs

    8

    Number of Inputs

    2

    Internal or External

    Internal

    Amplifier Includes Full Output

    No

    Product Requires Power Supply Unit (PSU)

    No

    RED Class 0 or Class 1

    Class 0

    Inline Booster or Distribution Amplifier

    Distribution Amplifier (Low)

    Width

    50mm

    Depth

    105mm

    Height

    335mm

    Weight

    0.9kg

    Karl
    29/11/2024

    No issues Thanks


    29/11/2024

    Excellent service, even with a small order.

    Jonathan
    25/11/2024

    Helpful and prompt service. Know their stuff.

    Sophie Ella
    25/11/2024

    Great company to deal with

    Daren
    25/11/2024

    Speedy delivery, friendly tech support and good prices. Thank you.

    Google Company Reviews

    karl taylor
    karl taylor
    29/11/2024

    No issues. Very quick posting. Thank you

    mike medcalf
    mike medcalf
    26/11/2024

    Item was as described and arrived promptly. Would recommend and use again.

    Laurie Harper
    Laurie Harper
    22/11/2024

    Very helpful on the phone and swift (less than 24 hours) delivery. Many thanks.

    Ian Stewart
    Ian Stewart
    21/11/2024

    Great service, ordered Monday evening and received Wednesday morning. Can't fault that.

    Nigel Tullett
    Nigel Tullett
    21/11/2024

    item works well

    Discontinued

    This product has been discontinued, please see products below.