Quick Add
Inline 5G and 4G LTE Filter For Interference
Product Code: PROLTE5G700
- 25dB inline LTE blocking filter
- A convenient low-cost filter
- Overcomes interference from LTE (5G)
- Use outdoors if connections are sealed
Payment methods accepted
Product Description
F-Type Inline LTE Blocking Filter 25dB LTE Block (Passband channels 21 to 48)
Features:
- A convenient low-cost filter for overcoming interference to broadcast reception from LTE (5G) mobile networks.
- Passes all terrestrial broadcast transmissions up to and including TV channel 48.
- High attenuation in LTE bands, will cure the majority of interference problems, from both base stations and mobile user equipment.
- Low insertion loss less than 1dB and good 75 Ohm match throughout the pass-band.
- F connectors with good screened metal casing, helping prevent leakage around the filter.
- Male and female connectors allow insertion into existing systems with no need for further cables or back-to-back adapters.
- Power-pass: this is a pure low-pass filter and passes AC and DC line-power.
- Care must be taken to avoid interference pick-up after the filter. Attention must be paid to the quality of components such as fly leads and outlet plates, etc.
- In severe cases two filters may be cascaded by screwing them directly together.
- These filters can be used externally you will however need to seal the f connections with self amalgamating
Features:
Product Code | Connection | Insertion loss in pass-band | Attenuation > 700Mhz | ||||||||||||
PROLTE5G700 | F |
|
|
Related products
Alternative products
Product Description
F-Type Inline LTE Blocking Filter 25dB LTE Block (Passband channels 21 to 48)
Features:
- A convenient low-cost filter for overcoming interference to broadcast reception from LTE (5G) mobile networks.
- Passes all terrestrial broadcast transmissions up to and including TV channel 48.
- High attenuation in LTE bands, will cure the majority of interference problems, from both base stations and mobile user equipment.
- Low insertion loss less than 1dB and good 75 Ohm match throughout the pass-band.
- F connectors with good screened metal casing, helping prevent leakage around the filter.
- Male and female connectors allow insertion into existing systems with no need for further cables or back-to-back adapters.
- Power-pass: this is a pure low-pass filter and passes AC and DC line-power.
- Care must be taken to avoid interference pick-up after the filter. Attention must be paid to the quality of components such as fly leads and outlet plates, etc.
- In severe cases two filters may be cascaded by screwing them directly together.
- These filters can be used externally you will however need to seal the f connections with self amalgamating
Features:
Product Code | Connection | Insertion loss in pass-band | Attenuation > 700Mhz | ||||||||||||
PROLTE5G700 | F |
|
|
Technical Specification
IEC or F Type
F Type
Width
90mm
Depth
30mm
Height
22mm
Weight
0.06kg
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
07/09/2024
All Arrials I purchased were installed at BBC Radio Gloucester with great results Will be purchasing more soon Thank you Blake Team DAB @ FM
03/09/2024
I used the online customer support system used by Blake UK for advice regarding my intended installation and got very quick and helpful advice on what would suit me best….this was honest advice as I was thinking of purchasing more expensive items that would be unnecessary and also possibly even detrimental to my intended installation. My order was received very quickly and although there had been a small mistake regarding the length of cable I had ordered this was immediately rectified by Blake UK again using their online messaging system. Personally I cannot fault Blake UK and would be very happy to recommend them to anyone, a very helpful and professional business, thank you.
31/08/2024
As described and arrived quickly. Well packaged
30/08/2024
Rapid and extremely efficient service. Ordered in the afternoon and delivered next morning. Exceptional service and excellent products which work impeccable. Would give this Company 11/10!
20/08/2024
Very helpful
Payment methods accepted
Product Description
F-Type Inline LTE Blocking Filter 25dB LTE Block (Passband channels 21 to 48)
Features:
- A convenient low-cost filter for overcoming interference to broadcast reception from LTE (5G) mobile networks.
- Passes all terrestrial broadcast transmissions up to and including TV channel 48.
- High attenuation in LTE bands, will cure the majority of interference problems, from both base stations and mobile user equipment.
- Low insertion loss less than 1dB and good 75 Ohm match throughout the pass-band.
- F connectors with good screened metal casing, helping prevent leakage around the filter.
- Male and female connectors allow insertion into existing systems with no need for further cables or back-to-back adapters.
- Power-pass: this is a pure low-pass filter and passes AC and DC line-power.
- Care must be taken to avoid interference pick-up after the filter. Attention must be paid to the quality of components such as fly leads and outlet plates, etc.
- In severe cases two filters may be cascaded by screwing them directly together.
- These filters can be used externally you will however need to seal the f connections with self amalgamating
Features:
Product Code | Connection | Insertion loss in pass-band | Attenuation > 700Mhz | ||||||||||||
PROLTE5G700 | F |
|
|
Related products
Alternative products
Great service and company to deal with