Quick Add
4-Way FM/DAB/UHF Amplifier
Product Code: PROAMP24
- For distributing TV, FM & DAB signal
- For up to 4 TVs
- Self powered
- IEC coax connectors
- RED compliant
Discontinued
Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...
Product Description
4-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 4 Output-9dB
Features:- Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
- Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
- Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
- 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
- Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
- With equipotential bonding point.
Technical Information:
| Product Code | Inputs | Outputs | Connections | Gain | Full Gain | Max Input | Line Power | ||||
PROAMP24 Mk3 | 2* | 4 | IEC | 9dB |
2* | 6 | IEC | 5dB | 15.9dB | 77dBV | 12V, 100mA |
PROAMP28 Mk3 | 2* | 8 | IEC | 5dB | 15.8dB | 77dBV | 12V, 100mA |
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
- Cool-running designs independently certified to relevant safety and EMC standards.
- Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
PROAMP Range:
Related products
Other products in New Products range
Alternative products
Product Description
4-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 4 Output-9dB
Features:- Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
- Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
- Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
- 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
- Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
- With equipotential bonding point.
Technical Information:
| Product Code | Inputs | Outputs | Connections | Gain | Full Gain | Max Input | Line Power | ||||
PROAMP24 Mk3 | 2* | 4 | IEC | 9dB |
2* | 6 | IEC | 5dB | 15.9dB | 77dBV | 12V, 100mA |
PROAMP28 Mk3 | 2* | 8 | IEC | 5dB | 15.8dB | 77dBV | 12V, 100mA |
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
- Cool-running designs independently certified to relevant safety and EMC standards.
- Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
PROAMP Range:
Technical Specification
IEC or F Type
IEC
Number of Outputs
4
Number of Inputs
2
Internal or External
Internal
Amplifier Includes Full Output
No
Product Requires Power Supply Unit (PSU)
No
RED Class 0 or Class 1
Class 0
Inline Booster or Distribution Amplifier
Distribution Amplifier (Low)
Width
50mm
Depth
105mm
Height
335mm
Weight
0.9Kg
19/04/2024
15/04/2024
I researched for many TV aerials and my friend who was ex aerial rigger recommended me Blake aerials as you can’t go wrong with them that was his words and it was true
13/04/2024
Ok until Blake sold me an item they didn't have in stock ...
05/04/2024
Very good service as a company, very let down by sending out parts poorly packaged, must cost a fortune sending replacements out..
05/04/2024
Seem fine
Google Company Reviews
06/06/2024
Went to Blakes for some u bolts for a radio antenna on my tower, the young girl at the desk and the bold chap wandering round the place helped us.We had tried screw fix B & Q looked on line and we were met with a great service, chap even wanted to drill the antenna plate out with bigger holes, will be back here for all my antenna parts in future. Mike Hardy M1KEY from barnsley
03/06/2024
Simple to order, clear product description and delivered as scheduled. Worked first time out of the box. Would recommend without hesitation.
02/06/2024
Faultless and quick
19/05/2024
Blake UK Ltd I was pleasantly surprised by this Sheffield Company. They're easy to order from,in my case online and email and text communication as I lip read, the item was ready to collect as per the order agreed. Far better service than Amazon for the said item still on back order with Amozon with a delivery date as far away as November 2024. I think it's probably come full circle, and shopping experience might be coming back, and with a company like Blake UK...I'd happily recommend them over and over. Well done 👏
14/05/2024
A REFRESHING CHANGE. Needed more info on an item. Fast response, friendly, informed, clear, offered alternative suggestion.... First experience with "Blake". Couldn't have asked for more. Thanks a lot Blake. I'm buying.
Discontinued
Please note this product has been discontinued, we'd recommend you consider the alternative product shown below...
Product Description
4-Way FM/DAB/UHF Distribution Amplifier; 2 Input; 4 Output-9dB
Features:- Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution.
- Mk 3 versions have dual-filtered VHF inputs covering Bands II and III, with equipotential bonding point.
- Sharp cut-off 'TETRA' filtering on UHF input helps avoid interference from nearby transmitters.
- 12V preamplifier line-power available at the UHF input. Rated load current 100mA max.
- Higher gain 'FULL' output on the 6- and 8-way versions allows system expansion.
- With equipotential bonding point.
Technical Information:
| Product Code | Inputs | Outputs | Connections | Gain | Full Gain | Max Input | Line Power | ||||
PROAMP24 Mk3 | 2* | 4 | IEC | 9dB |
2* | 6 | IEC | 5dB | 15.9dB | 77dBV | 12V, 100mA |
PROAMP28 Mk3 | 2* | 8 | IEC | 5dB | 15.8dB | 77dBV | 12V, 100mA |
*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.
- Cool-running designs independently certified to relevant safety and EMC standards.
- Separate filtered VHF and UHF inputs for FM radio (Band II), DAB* (Band III) and UHF TV.
The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.
PROAMP Range:
Related products
Other products in New Products range
Alternative products
Great service and company to deal with