Continue to Basket

5 Wire 24-Way Multiswitch, Whyte Series 5

Product Code: WM524

  • 1 Dish
£336.12 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

Whyte Series 5 WM524

The Whyte Series 5 Multiswitch range is universally flexible and is designed to be used in small, medium to large Integrated Reception Systems (IRS). Whyte Multiswitches can be used as Standalone Multiswitches when powered directly via the18V Auxiliary Input by using a Whyte 0.8A Power Supply Unit (model WPSU-0.8A).

Features:

  • Line Powered Multiswitch
  • Use as standalone when powered with a Whyte PSU
  • SAT gain 10dB / TERR gain 8dB
  • Gain Control on all inputs
  • Comes with Earth Bars fitted
  • Uses the receiver power to reduce demands on system PSU
  • Colour coded inputs and outputs
  • LED power indicator
  • Inbuilt LTE filter
  • Adequate clearance to route cables under the Multiswitch
  • Use Whyte Series 5 Launch Amplifiers and Taps/Splitters to build large capacity IRS Systems

Specifications:

Frequency Range: SAT 950-2150MHz | TERR 87-790MHz
4G/5G Switch: YES
Input (F-Type Female): 4 SAT + 1 TERR
Tap Outputs (F-Type Female): 24
Gain: SAT: =10dB | TERR:=8dB
Gain Control: SAT 11dB2dB | TERR 11dB2dB
Return Loss SAT Trunk Input/Output: SAT >10dB/>10dB TERR >8dB/8dB
Return Loss Tap Output: >8dB
Max Output Level: SAT (IMA -35dB) 100dBV TERR (IMA -60dB) >85dBV
Isolation: Trunk - Trunk >33dB Cross Polar: =25dB Tap-Tap SAT >30dB Tap-Tap TERR >30dB Rejection =25dB
Impedance: 75 Ohms
Switching Commands: Legacy 13/18V / 22kHz Tone
Power Supply Voltage: 18V DC
Powering: Via DC Input / Via HL and HH Input
Auxiliary DC Output (F-Type Female: YES
Power Consumption (Max)@18V: 230mA
Masthead Power Supply (Switchable): TERR Input Only 12V DC 100mA
Earth Terminal Bars (Tap Outputs): Fitted
Earth Lug: Up to 6mm Core
Dimensions Incuding Earth Bars (mm): 278 x 182 x 43
Weight: 1240g

Product Description

Whyte Series 5 WM524

The Whyte Series 5 Multiswitch range is universally flexible and is designed to be used in small, medium to large Integrated Reception Systems (IRS). Whyte Multiswitches can be used as Standalone Multiswitches when powered directly via the18V Auxiliary Input by using a Whyte 0.8A Power Supply Unit (model WPSU-0.8A).

Features:

  • Line Powered Multiswitch
  • Use as standalone when powered with a Whyte PSU
  • SAT gain 10dB / TERR gain 8dB
  • Gain Control on all inputs
  • Comes with Earth Bars fitted
  • Uses the receiver power to reduce demands on system PSU
  • Colour coded inputs and outputs
  • LED power indicator
  • Inbuilt LTE filter
  • Adequate clearance to route cables under the Multiswitch
  • Use Whyte Series 5 Launch Amplifiers and Taps/Splitters to build large capacity IRS Systems

Specifications:

Frequency Range: SAT 950-2150MHz | TERR 87-790MHz
4G/5G Switch: YES
Input (F-Type Female): 4 SAT + 1 TERR
Tap Outputs (F-Type Female): 24
Gain: SAT: =10dB | TERR:=8dB
Gain Control: SAT 11dB2dB | TERR 11dB2dB
Return Loss SAT Trunk Input/Output: SAT >10dB/>10dB TERR >8dB/8dB
Return Loss Tap Output: >8dB
Max Output Level: SAT (IMA -35dB) 100dBV TERR (IMA -60dB) >85dBV
Isolation: Trunk - Trunk >33dB Cross Polar: =25dB Tap-Tap SAT >30dB Tap-Tap TERR >30dB Rejection =25dB
Impedance: 75 Ohms
Switching Commands: Legacy 13/18V / 22kHz Tone
Power Supply Voltage: 18V DC
Powering: Via DC Input / Via HL and HH Input
Auxiliary DC Output (F-Type Female: YES
Power Consumption (Max)@18V: 230mA
Masthead Power Supply (Switchable): TERR Input Only 12V DC 100mA
Earth Terminal Bars (Tap Outputs): Fitted
Earth Lug: Up to 6mm Core
Dimensions Incuding Earth Bars (mm): 278 x 182 x 43
Weight: 1240g

Technical Specification

Width

76mm

Depth

227mm

Height

320mm

Weight

0.26Kg

Feefo Company Reviews

Ken
22/02/2024

The product was dispatched quickly and I would highly recommend using them again


19/02/2024

Fast delivery, good price, better quality than existing bracket.

George
07/02/2024

Does the job - excellent.

George
07/02/2024

Response from Blake UK in every respect was very good and the product purchased is excellent. My only criticism is that the package that my omni FM/Dab aerial was sent in could have had more packing material as the carton was damaged in transit with a part of the product sticking out.

Keith
05/02/2024

Excellent service, both before and after sales.

Google Company Reviews

Dermot Nolan
19/03/2024

I already knew Blake from years ago. They are a quality vendor. The first BLA-LP56K was damaged by the courier in transit and they replaced it straightaway no quibbles the next day. This worked a treat in the loft with a masthead amp (have power in big loft). C/N : 30dB, sig: 100%, quality:100%: BER: 0.0. The aerial was connected into an IRS as the rooftop aerial had failed probably due to water ingress in the balun and I was quoted from £250 - £450 for a replacement outside antenna, probably because we have a very tall house/outside installation.Why bother when you know a log in the loft is going to work 11 miles from a 200kW station. As Blake say this is suitable for medium or strong signal areas but the addition of the masthead boosts the signal nicely for all round the house distribution.

Nev Wilson
14/03/2024

Best online chat service, gets exact answers and has good advice. Hoping products just as good!

David Campbell
13/03/2024

FM Roof Aerial Kit This Blake UK FM Aerial Kit is of excellent quality. Noticeably better in every way than another two kits I've had over the last 15 years from other sites, lower cost and with lower shipping costs. Will definitely buy from them again.

Chris White
07/03/2024

Needed a replacement aerial, easy guide on the website, ordered, quick delivery and fitted without any problems. Certainly be shopping again if I need to get any aerials in future.

John Tillson
26/02/2024

Everything as advertised, great delivery.

£336.12 inc vat
Lifetime guarantee on internally installed products Includes technical support

Payment methods accepted

Mastercard Visa AMEX PayPal Discover Apple Pay Google Pay

Product Description

Whyte Series 5 WM524

The Whyte Series 5 Multiswitch range is universally flexible and is designed to be used in small, medium to large Integrated Reception Systems (IRS). Whyte Multiswitches can be used as Standalone Multiswitches when powered directly via the18V Auxiliary Input by using a Whyte 0.8A Power Supply Unit (model WPSU-0.8A).

Features:

  • Line Powered Multiswitch
  • Use as standalone when powered with a Whyte PSU
  • SAT gain 10dB / TERR gain 8dB
  • Gain Control on all inputs
  • Comes with Earth Bars fitted
  • Uses the receiver power to reduce demands on system PSU
  • Colour coded inputs and outputs
  • LED power indicator
  • Inbuilt LTE filter
  • Adequate clearance to route cables under the Multiswitch
  • Use Whyte Series 5 Launch Amplifiers and Taps/Splitters to build large capacity IRS Systems

Specifications:

Frequency Range: SAT 950-2150MHz | TERR 87-790MHz
4G/5G Switch: YES
Input (F-Type Female): 4 SAT + 1 TERR
Tap Outputs (F-Type Female): 24
Gain: SAT: =10dB | TERR:=8dB
Gain Control: SAT 11dB2dB | TERR 11dB2dB
Return Loss SAT Trunk Input/Output: SAT >10dB/>10dB TERR >8dB/8dB
Return Loss Tap Output: >8dB
Max Output Level: SAT (IMA -35dB) 100dBV TERR (IMA -60dB) >85dBV
Isolation: Trunk - Trunk >33dB Cross Polar: =25dB Tap-Tap SAT >30dB Tap-Tap TERR >30dB Rejection =25dB
Impedance: 75 Ohms
Switching Commands: Legacy 13/18V / 22kHz Tone
Power Supply Voltage: 18V DC
Powering: Via DC Input / Via HL and HH Input
Auxiliary DC Output (F-Type Female: YES
Power Consumption (Max)@18V: 230mA
Masthead Power Supply (Switchable): TERR Input Only 12V DC 100mA
Earth Terminal Bars (Tap Outputs): Fitted
Earth Lug: Up to 6mm Core
Dimensions Incuding Earth Bars (mm): 278 x 182 x 43
Weight: 1240g