Free Delivery

Free delivery

on orders over £50
Lifetime Guarantee

Lifetime guarantee

on internally installed products
Free Support

Free customer support

online and via phone
Free Delivery

Free delivery

on orders over £50
Lifetime Guarantee

Lifetime guarantee

on internally installed products
Free Support

Free customer support

online and via phone

View Cart

6-Way FM/DAB/UHF Distribution Amplifier with Return Path; 2 Input; 6 Output-5dB

Product Code: PROAMP26R

£58.93 inc vat
In Stock Lifetime Warranty on internally installed products Includes Support

Payment methods accepted

Mastercard Visa American Express PayPal Discover

Product Description

6-Way FM/DAB/UHF {FORGEGLOSSARY_Distribution Amplifier} with Return Path; 2 Input; 6 Output-5dB

Features:

  • These mains-powered multi-way amplifiers are used to distribute the UHF output from a satellite receiver (usually from the RF OUT-2 port of a Sky&trade box), making a selected satellite channel available at up to eight additional outputs around the home.
  • The built-in RF return path (5-10 MHz) together with power for remote infrared receiver 'eyes' on all outputs makes it a simple matter to add remote control. VHF/FM and/or DAB aerials can also be connected (4-, 6- and 8-way models only).
  • Cool-running designs independently certified to relevant safety and EMC standards.
  • Separate filtered VHF and UHF inputs on the 4-, 6- and 8-way models. NEW Mk 3 versions have dual-filtered VHF inputs covering both Bands II and III, adding capability for DAB, with equipotential bonding point.
  • Sharp cut-off 'TETRA' filtering on UHF input of 4-, 6- and 8-way models helps avoid interference from nearby HF and VHF transmitters.
  • 9V power for infrared receiver eyes on all outputs (max. load 15 mA per outlet). Each output is individually short-circuit protected.
  • With equipotential bonding point.
Technical Information:
Product Code
Inputs
OutputsConnectorsGainMax Input
Frequency Range

PROAMP24R Mk3

2*

4

F

9dB

77dBV

VHF (BII and BIII) UHF

PROAMP26R Mk3

2*

6

F

5dB

77dBV

VHF (BII and BIII) UHF

PROAMP28R Mk3

2*

8

F

5dB

77dBV

VHF (BII and BIII) UHF

*VHF input of new Mk2 and Mk3 versions accepts Bands II and III (87.5 - 108 and 174 - 230MHz). Older units accept FM Band II only.

The maximum output level per multiplex is per the table in dBV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide.

Find out more about using this product with the New Sky&trade boxes.

Introducing the PROception PROLINK22 RF replicator

New Sky&trade set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loop through facilities have been replaced with the new I/O PORT a small round connector (10- pin mini-DIN) which allows an external RF replicator (modulator) unit to provide similar distribution functions.

Technical Specification

IEC or F Type

F Type

Number of Outputs

6

Number of Inputs

2

Internal or External

Internal

Amplifier Includes Full Output

No

Product Requires Power Supply Unit (PSU)

No

Amplifiers With Return Path

No

RED Class 0 or Class 1

Class 0

Inline Booster or Distribution Amplifier

Distribution Amplifier (Low)

£58.93 inc vat
In Stock Lifetime Warranty on internally installed products Includes Support

Payment methods accepted

Mastercard Visa American Express PayPal Discover