Dual Mode 10-Way Amp, Line Powered, UHF/FM/DAB Input With IR.
This versatile 10-way amplifier has separate inputs for the VHF/FM, DAB and UHF bands.
It can be powered locally, where mains is available nearby, or remotely via any of its outputs.
Dual-Mode technology allows the amplifier to behave either as a traditional multi-way distribution amplifier (mode 1), or as return-path amplifier additionally providing remote control capability for a Sky digital satellite receiver or PVR (mode 2).
FEATURES
Ideal for digital and analogue house-wide VHF radio and UHF TV distribution to ten or more outlets, ready for digital switch-over
Dual-mode operation, plain or return path - two amplifiers in one!
Automatic mode selection (senses voltage from RF OUT-2 of Sky receiver at UHF input)
Line power available for UHF preamplifier (Mode 1 only)
Power at all outputs for infrared eyes (Mode 2 only)
Flexible powering capability - local or remote, using proPSA125 or proPSU112X (see diagrams)
In Mode 2 - the complete 10-way system can be powered entirely from via a proLINK22(Flexible RF Output Modulator - restores Sky distribution) with a proPSA125 fitted at the proLINK22;for one of new design Sky Boxes that have that they have no ‘RF‑2’ connection. See link below for more details.
With equipotential bonding point.
TECHNICAL INFORMATION
VHF/FM
DAB
UHF
Gain
1.5 dB
4 dB
4.5 dB
Max recommended input
70 dBµV
70 dBµV
78 dBµV
Mode 1
Mode 2
Power requirements*
8.5 - 18V, 80 mA
10.5 - 18V, 120 mA
External power out
UHF preamp:
5V at 30 mA max.
IR "eyes":
9V at 10 mA max. (x10)
*Excludes current drawn by external loads. Certain features of this product are covered by UK Patent no. 2425443. See full data sheet for detailed description and comprehensive data.
The maximum output level per multiplex is per the table in dBuV when there are eight equal level multiplexes. If the number of multiplexes to be carried is not eight please refer to our Mux guide at www.blake-uk.com/muxcap.
Find out more about using this product with the New Sky Boxes
Introducing the PROception proLINK22 ‘RF replicator’
New Sky set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loopthrough facilities have been replaced with the new ‘I/O PORT’ – a small round connector (10- pin mini-DIN) which allows an external ‘RF replicator’ (modulator) unit to provide similar distribution functions.
PROCON01 - 'F' Male Twist-On +O-Ring for RG6
Select the correct Pack Quantity. For Boxes of 100 items select Bag/Box. A Quantity of 2 is therefore 200 Peices.
Less then 100 items select Single Item or Piece and amend the Quantity to the number required.
PROCON41 - 'F' Female to 'IEC' Male Adaptor
Select the correct Pack Quantity. For Boxes of 100 items select Bag/Box. A Quantity of 2 is therefore 200 Peices.
Less then 100 items select Single Item or Piece and amend the Quantity to the number required.
PROCON13 - 'F' Male Crimp-On For SKY+ Shotgun
Select the correct Pack Quantity. For Boxes of 100 items select Bag/Box. A Quantity of 2 is therefore 200 Peices.
Less then 100 items select Single Item or Piece and amend the Quantity to the number required.
Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution. The range includes a one-way unit which can be used as a signal booster or line-extender amplifier. Cool-running designs independently certified to relevant safety and EMC standards.
Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution. The range includes a one-way unit which can be used as a signal booster or line-extender amplifier. Cool-running designs independently certified to relevant safety and EMC standards.
Traditional mains-powered multi-way aerial amplifiers, for off-air VHF and UHF signal distribution. The range includes a one-way unit which can be used as a signal booster or line-extender amplifier. Cool-running designs independently certified to relevant safety and EMC standards.
Price£19.69
Awaiting stock - due soon, will confirm on your acknowledgement
