Graded Amplifiers with Return Path - Graded PROAMP24R-26R-28R-GRADED
  • Graded Amplifiers with Return Path - Graded PROAMP24R-26R-28R-GRADED

Graded Amplifiers with Return Path - Graded

£28.10
Tax included

PROAMP24R-26R-28R - 4-6-8 way Amplifier with Return Path - Graded.

*** LIMITED STOCKS ****

Tested and carry full 2-year warranty. Packing may vary from the original. May show signs of previous installation.

Amplifier Outputs
  • 4-way
  • 6-way
  • 8-way
Quantity
Out of stock

  • Secure Server and Payment Providers Secure Server and Payment Providers
  • Fast Delivery Options Fast Delivery Options
  • Buy with Confidence with our Returns policy Buy with Confidence with our Returns policy

4-6-8 Way Amplifier, With Separate FM & UHF Inputs, Return Path

PROAMP26 PROAMP28

These mains-powered multi-way amplifiers are used to distribute the UHF output from a satellite receiver (usually from the RF OUT-2 port of a Sky box), making a selected satellite channel available at up to eight additional outputs around the home. The built-in RF return path (5-10 MHz) together with power for remote infrared receiver 'eyes' on all outputs makes it a simple matter to add remote control. VHF/FM and/or DAB aerials can also be connected (4-, 6- and 8-way models only) Cool-running designs independently certified to relevant safety and EMC standards.

 

FEATURES

  • Separate filtered VHF and UHF inputs on the 4-, 6- and 8-way models. NEW Mk 3 versions have dual-filtered VHF inputs covering both Bands II and III, adding capability for DAB, with equipotential bonding point.
  • Sharp cut-off 'TETRA' filtering on UHF input of 4-, 6- and 8-way models helps avoid interference from nearby HF and VHF transmitters.
  • 9 V power for infrared receiver eyes on all outputs (max. load 15 mA per outlet). Each output is individually short-circuit protected.
  • Compatible with PROception proSAT1EYE low-current IR eye, and industry-standard eyes.
  • With equipotential bonding point.

 

 

TECHNICAL INFORMATION

 
Product Code    
 Inputs  
 Outputs             Connectors        Gain                     Max Input
Frequency Range

PROAMP24R Mk3

      2*

4

F

9 dB

77 dBµV

  VHF (BII & BIII) & UHF 

PROAMP26R Mk3

      2*

6

F

5 dB

77 dBµV

  VHF (BII & BIII) & UHF 

PROAMP28R Mk3

      2*

8

F

5 dB

77 dBµV

  VHF (BII & BIII) & UHF 

*VHF input of new Mk2 & Mk3 versions accepts Bands II & III (87.5 - 108 & 174 - 230MHz). Older units accept FM Band II only.

Find out more about using this product with the New Sky Boxes

Introducing the PROception proLINK22 ‘RF replicator’

New Sky set-top boxes such as the DRX595 and DRX890W do not have the familiar aerial input, RF-1 and RF-2 connectors. These RF-loopthrough facilities have been replaced with the new ‘I/O PORT’ – a small round connector (10- pin mini-DIN) which allows an external ‘RF replicator’ (modulator) unit to provide similar distribution functions.

Applicable to the following models

proAMP12R proAMP104X
proAMP24R proAMP310X
proAMP26R proMHD14R
proAMP28R proSAT1EYE
proSTR5M proSTR10CRS
proSTR5S proSTR10S
PROAMP24R-GRADED

Specific References

ean13
5060041661788

You might also like

1 other product in the same category:

Customers who bought this product also bought: