Infrared Remote Receiver Eye for Digital Satellite Receivers - Signal Distribution

Currency: GBP (£)

| USD ($)

| EUR (€)

Empty

PROSAT1EYE

NEW Mk 3 Infrared Remote Receiver 'eye' has 'F' connection.
Unique improved design 'eye' with reduced current consumption (5 mA) to ease loading on satellite receiver or distribution amplifier power supplies.
Wide working voltage range - operates over 5.5 - 18 V without damage.
Compatible with all Sky receivers on RF OUT-2, and with all PROception distribution hubs and dual-mode amplifiers with return path facilities.
Red LED power indicator - a useful diagnostic aid for confirming power system integrity.
Discreet small form-factor eye head, supplied with self-adhesive Velcro mounting pads.

£8.99

proSAT1EYE Mk3
Signal frequency range	87.5 - 862 MHz (Bands II-V)
Insertion loss	1.5 dB
Return path signal frequency	7 MHz
Signal connections	Input 'IEC' female socket; output 'IEC' male on short flying lead
DC power requirement	9 V nominal at approx. 5 mA (operable over 5.5 - 18 V)

Turning on RF-2 Out on Sky Boxes

Standard Sky Box (Sky, Sky+)	New Sky Box (Sky+ HD)
Press the SERVICES button once. Press the NUMBER 4 button - (System Setup). Press the 0 (ZERO) button, then the NUMBER 1 button, then the SELECT button - (Installer Menu). Press the NUMBER 4 button again - (RF Outlets). Press the DOWN ARROW button once - (Outlet Power Supply). Press the SIDE ARROW button once to turn the power supply to ON. Press the DOWN ARROW button once again - (Save New Settings). Press SELECT to finish the set-up. Press SKY to exit the menu.	Press the SERVICES button once. Press the RIGHT ARROW button once (Settings), then press SELECT. Press the 0 (ZERO) button, then the NUMBER 1 button, then the SELECT button - (Setup). Press the RIGHT ARROW button three times - (RF Outlets). Press the DOWN ARROW button twice - (RF Outlet Power Supply). Press the SIDE ARROW button once to turn the power supply to ON. Press the GREEN BUTTON to finish the set-up. Press SKY to exit the menu.

Standard Sky Box (Sky, Sky+)

New Sky Box (Sky+ HD)

Press the SERVICES button once.
Press the NUMBER 4 button - (System Setup).
Press the 0 (ZERO) button, then the NUMBER 1 button, then the SELECT button - (Installer Menu).
Press the NUMBER 4 button again - (RF Outlets).
Press the DOWN ARROW button once - (Outlet Power Supply).
Press the SIDE ARROW button once to turn the power supply to ON.
Press the DOWN ARROW button once again - (Save New Settings).
Press SELECT to finish the set-up.
Press SKY to exit the menu.

Press the SERVICES button once.
Press the RIGHT ARROW button once (Settings), then press SELECT.
Press the 0 (ZERO) button, then the NUMBER 1 button, then the SELECT button - (Setup).
Press the RIGHT ARROW button three times - (RF Outlets).
Press the DOWN ARROW button twice - (RF Outlet Power Supply).
Press the SIDE ARROW button once to turn the power supply to ON.
Press the GREEN BUTTON to finish the set-up.
Press SKY to exit the menu.

Please enter your voucher code below.
Voucher Code
Comment
Discount
Minimum Order Value

Infrared Remote Receiver "Eye" for Digital Satellite Receivers