PROception proAMP-U Series Amplifier
Site Product Post Code

proAMP108U

Freeview is a registered trade mark of DTV Services Ltd

Product Overview
Specification
Application Data
This addition to the PROception range addresses the need to provide good-quality off-air terrestrial signals to all TV receivers in a household in preparation for Digital Switchover (DSO). The PROception Micro-8 is one of the smallest and most flexible 8-way UHF distribution amplifiers available. Ideal for providing up to eight wired UHF TV outlet points from a single aerial, the product is extremely simple to install and can be powered using either a local or a remote power supply unit. It can also be powered directly from some types of digital terrestrial receiver ('Freeview box').

proAMP108U - features summary

  • Excellent input filtering above and below the UHF TV band to reduce risk of interference problems from CB, private mobile radio, TETRA, GSM base stations, etc.
  • New compact moulded housing with discreet black finish.  Suitable for installation in a confined space.
  • Moderate gain (3dB) to overcome distribution cable losses without causing 'signal overload' problems.
  • Good noise figure and output capability.
  • 'F' connectors for easy connection and good system screening.
  • Suitable for both digital and analogue applications, fully DTT-compatible.
  • Equipotential bonding terminal for compliance with BS EN 60728-11.

Flexible powering options

Local or remote power (5 - 15 V DC) is accepted from any of the following:

  • PROception proPSU11F, proPSU12F or proPSU11C 12 V in-line power unit on any of the output lines.
  • PROception proPSA123 plug-in mains power adaptor connected to the local DC power port.
  • One or more DVB-T (Freeview †) receiver(s) which can provide 5 V DC power from the antenna socket.

An LED power indicator is provided.

  1. Signal handling capability is given for 5 analogue TV channels plus up to 6 DTT multiplexes at = -14 dB relative level.
  2. Limiting values 4.8 .. 18 V (powered via DC power port or any output).
  3. This amplifier may be used for distribution of set-top box output signals but does not provide 'return-path' remote control facilities.




| Home Page | Site Map | Trade Login | About Us | Search | Terms & Conditions | Privacy Policy | Contact Us | © Blake UK Ltd 1971 - 2009V4.2/C