 |
New generation multi-way amplifiers
Get ready for Digital Switchover with these versatile amplifiers.
Flexible powering, local or remote - no mains supply required at the
amplifier location.
X-series
dual-mode amplifiers
Dual Mode Amplifiers
Flexible
Powering!
Two new amplifiers with PROception dual-mode technology.
- proAMP310X 10-way dual-mode amplifier for the FM, Band lll DAB and UHF
TV bands.
- proAMP104X compact 4-way UHF amplifier.
- 4-point system can be powered from a Sky box.
The 'Micro-8' compact UHF amplifier
- proAMP108U - possibly the smallest 8-way amplifier on the market.
- Power an 8-point system from a Freeview box.
|
| Multi-way VHF/UHF distribution amplifiers
Traditional mains-powered amplifiers with VHF and UHF inputs.
proAMP aerial signal booster and distribution
amplifiers
-
1-, 2-, 4-, 6- and 8-way
high-performance models.
- Classic ‘full’ outputs allow system expansion
using external passives.
- 12 V 100 mA protected line-power
available at UHF input.
proAMP-R 'return-path' amplifiers
- 2-, 4-, 6- and 8-way high-performance
amplifiers with RF return path and 9 V IR receiver ‘eye power’ on all
outputs.
|
|
 |
starBOX RF hubs
starBOXes combine VHF, UHF
and satellite signals to feed a ‘master’ outlet. A UHF return from set-top
equipment is fed back to the starBOX for distribution to 5 or 10 additional
points.
- proSTR10S 1+10-way ‘solo’ unit for individual home
applications.
- proSTR5M 1+5-way special ‘MDU’ version with combined inputs for use where incoming
signals arrive from a multiswitch system.
- Compatible outlet plates range available.
|
|
.jpg) |
Remote control
Infrared receiver ‘eye’ providing remote control extension for Sky satellite receivers
when distributing signal from RF OUT-2.
- proSAT1EYE Mk 2 – improved eye design with reduced current consumption (5 mA)
for cooler running power units and a small energy saving.
- Compatible with all dual-mode, proAMP-R and
starBOX products.
|
|
 |
Masthead and outdoor products
Fully-screened masthead amplifiers and passive accessories
with robust diecast RF modules housed in proven weatherproof ABS mouldings.
proMHD14R dual-mode masthead amplifier
Dual Mode Amplifiers
Flexible Powering!
Fixed and
Variable-gain masthead preamplifiers
Masthead passives
|
|
 |
Power units
Energy-efficient designs for use with our range of
masthead amplifiers and the new generation amplifiers.
- 12 V 100 mA regulated supplies for all
masthead amplifiers, available with a choice of ‘IEC’ or ‘F’ connectors. These
units have electronic short-circuit protection and warning as standard.
- 2-way version with internal splitter –
handy for feeding two points from a one-way masthead.
- proPSU112X
200 mA unregulated unit for use with the 10-way new generation amplifier.
- proPSA123
plug-in power adaptor for local powering of new-generation amplifiers.
|
|
 |
Outlet plates
Installer-friendly outlet plates for a wide range of
applications.
|
|
 |
Network passive accessories
Two ranges of splitters and taps for MATV and satellite (IRS) applications.
- 5 – 862 MHz MATV range: splitters from 2 to 8 ways; tap-off units from 1 to 8 way with tap
values from 8 to 20 dB.
- 5 – 2300 MHz satellite range: power-passing splitters from 2 to 8 ways; 2-way taps from 10
to 20 dB with trunk power-pass.
- Five- and eight-way
Equipotential Bonding Bars.
|
|
 |
UHF modulator
- General-purpose AV modulator for DVD or CCTV applications, etc.
- SCART input (phono adaptor supplied).
- Loop-through RF connection.
- Frequency-agile: tamper-proof pushbutton channel setting (21 – 69) with non-volatile memory.
|
|
 |
Wireless video sender
A licence-exempt 2.4 GHz AV sender with remote control
return path.
- Useful for security, baby monitoring and
similar applications, or for linking video to outbuildings, etc. where a
hard-wired solution is not justified or not practical.
- Good quality wireless video and stereo audio transmission.
- Choice of four RF channels to avoid interference.
- Range up to 100 metres (clear line-of-sight conditions).
- Infrared remote return path on 433.92 MHz.
|
 |
Digital Indoor Aerial – DVB
(UK Freeview) and DAB
- Stylish discrete indoor aerial.
- Ideal for use with Analogue or Digital TV (Freeview) and DAB Radio
- Can be used locally (near the TV) or for weaker signal areas can be used
in the loft with the use of a longer coax cable, down to the required viewing
point.
- Omni-directional reception of digital terrestrial TV (DVB-T) and digital
radio (DAB)
- Can be positioned horizontally or vertically to suit incoming signal
polarity
|
|
 |
General information
All PROception products comply with relevant
European safety and EMC standards (generally EN 60065 and EN 50083-2). Product
designs are type tested for compliance in a leading European laboratory.
All RF amplifier inputs intended to be connected to an
antenna are well-filtered to reduce the risk of interference problems caused by
strong local out-of-band transmissions. All UHF antenna inputs are
‘TETRA-filtered’ as standard – i.e. they have a built-in sharp cut-off filter to
attenuate O2 Airwave transmissions in the 380 – 400 MHz band.
Proception is a registered producer under the UK WEEE
regulations and supports product recycling and re-use.
|