Dual Mode Amplifiers Flexible Powering!
This versatile amplifier is an addition to the PROception range of UHF masthead products. The unit has two modes of operation, allowing it to be used either as a four-way ‘aerial amplifier’ for off-air signal distribution, or as a ‘return-path amplifier’ for distribution of the UHF loop-through output of a Sky* or Sky+* receiver. In return-path mode full support is provided for remote infrared receivers (‘eyes’).The product addresses the real need for a lower-gain multi-way masthead or outdoor amplifier suitable for distributing digital terrestrial signals to four or more points. In the run-up to digital switch-over millions of users currently using set-top aerials for their kitchen and bedroom TVs will need to install RF distribution systems to provide adequate DTT signals. The multi-digital household is already a reality with large numbers of Freeview† receivers now being purchased for use with ‘second’ and ‘third’ TVs.Where more gain is required, without return-path capability, the proMHD14M or proMHD14V 4-way amplifiers should be considered.
1. Return-path mode is active only when the amplifier is powered via its input.2. Signal handling capability is given for 5 analogue TV channels plus up to 6 DTT multiplexes at = 14 dB relative level.3. Relative to passband gain.4. Excludes current drawn by remote IR receivers. (The 75 mA available from a Sky receiver will power a 4-way system with four eyes.)